olari/sigmaker-ida
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
Files
master
sigmaker-ida/idasdk76/include/segment.hpp
josh b1809fe2d9 update to ida 7.6, add builds
2021-10-31 21:20:46 +02:00

1213 lines
46 KiB
C++
Raw Permalink Blame History

/*
* Interactive disassembler (IDA).
* Copyright (c) 1990-2021 Hex-Rays
* ALL RIGHTS RESERVED.
*
*/
#ifndef _SEGMENT_HPP
#define _SEGMENT_HPP
#include <ida.hpp>
#include <range.hpp> // segments are range of addresses
// with characteristics
/*! \file segment.hpp
\brief Functions that deal with segments.
IDA requires that all program addresses belong to segments
(each address must belong to exactly one segment).
The situation when an address doesn't belong to any segment
is allowed as a temporary situation only when the user changes program
segmentation. Bytes outside a segment can't be converted to
instructions, have names, comments, etc.
Each segment has its start address, ending address and represents
a contiguous range of addresses. There might be unused holes between
segments.
Each segment has its unique segment selector. This selector is used
to distinguish the segment from other segments. For 16-bit programs
the selector is equal to the segment base paragraph. For 32-bit
programs there is special array to translate the selectors to
the segment base paragraphs. A selector is a 32/64 bit value.
The segment base paragraph determines the offsets in the segment.
If the start address of the segment == (base << 4) then the first
offset in the segment will be 0. The start address should be
higher or equal to (base << 4).
We will call the offsets in the segment 'virtual addresses'.
So, the virtual address of the first byte of the segment is
(start address of segment - segment base linear address)
For IBM PC, the virtual address corresponds to the offset part of the address.
For other processors (Z80, for example), virtual addresses correspond
to Z80 addresses and linear addresses are used only internally.
For MS Windows programs the segment base paragraph is 0 and therefore
the segment virtual addresses are equal to linear addresses.
*/
/// \defgroup seg Segments
/// \copybrief segment.hpp
/// Maximum number of segment registers is 16 (see segregs.hpp)
#define SREG_NUM 16
//-------------------------------------------------------------------------
// D E F I N I T O N O F S E G M E N T S T R U C T U R E
//-------------------------------------------------------------------------
/// \defgroup seg_t Segment structure
/// Definition of ::segment_t and related functions
/// \ingroup seg
//@{
/// Describes a program segment
class segment_t : public range_t
{
public:
/* 8 */ uval_t name; ///< use get/set_segm_name() functions
/* 12 */ uval_t sclass; ///< use get/set_segm_class() functions
/* 16 */ uval_t orgbase; ///< this field is IDP dependent.
///< you may keep your information about
///< the segment here
/* 20 */ uchar align; ///< \ref sa_
/// \defgroup sa_ Segment alignment codes
/// \ingroup seg_t
/// Used by segment_t::align
//@{
#define saAbs 0 ///< Absolute segment.
#define saRelByte 1 ///< Relocatable, byte aligned.
#define saRelWord 2 ///< Relocatable, word (2-byte) aligned.
#define saRelPara 3 ///< Relocatable, paragraph (16-byte) aligned.
#define saRelPage 4 ///< Relocatable, aligned on 256-byte boundary
#define saRelDble 5 ///< Relocatable, aligned on a double word (4-byte)
///< boundary.
#define saRel4K 6 ///< This value is used by the PharLap OMF for page (4K)
///< alignment. It is not supported by LINK.
#define saGroup 7 ///< Segment group
#define saRel32Bytes 8 ///< 32 bytes
#define saRel64Bytes 9 ///< 64 bytes
#define saRelQword 10 ///< 8 bytes
#define saRel128Bytes 11 ///< 128 bytes
#define saRel512Bytes 12 ///< 512 bytes
#define saRel1024Bytes 13 ///< 1024 bytes
#define saRel2048Bytes 14 ///< 2048 bytes
#define saRel_MAX_ALIGN_CODE saRel2048Bytes
//@}
/* 21 */ uchar comb; ///< \ref sc_
/// \defgroup sc_ Segment combination codes
/// \ingroup seg_t
/// Used by segment_t::comb
//@{
#define scPriv 0 ///< Private. Do not combine with any other program
///< segment.
#define scGroup 1 ///< Segment group
#define scPub 2 ///< Public. Combine by appending at an offset that meets
///< the alignment requirement.
#define scPub2 4 ///< As defined by Microsoft, same as C=2 (public).
#define scStack 5 ///< Stack. Combine as for C=2. This combine type forces
///< byte alignment.
#define scCommon 6 ///< Common. Combine by overlay using maximum size.
#define scPub3 7 ///< As defined by Microsoft, same as C=2 (public).
#define sc_MAX_COMB_CODE scPub3
//@}
/* 22 */ uchar perm; ///< \ref SEGPERM_ (0 means no information)
/// \defgroup SEGPERM_ Segment permissions
/// \ingroup seg_t
/// Used by segment_t::perm
//@{
#define SEGPERM_EXEC 1 ///< Execute
#define SEGPERM_WRITE 2 ///< Write
#define SEGPERM_READ 4 ///< Read
#define SEGPERM_MAXVAL (SEGPERM_EXEC + SEGPERM_WRITE + SEGPERM_READ)
//@}
/* 23 */ uchar bitness; ///< Number of bits in the segment addressing
///< - 0: 16 bits
///< - 1: 32 bits
///< - 2: 64 bits
#define SEG_MAX_BITNESS_CODE 2
/// Is a 16-bit segment?
bool is_16bit(void) const { return bitness == 0; }
/// Is a 32-bit segment?
bool is_32bit(void) const { return bitness == 1; }
/// Is a 64-bit segment?
bool is_64bit(void) const { return bitness == 2; }
/// Get number of address bits
int abits(void) const { return 1<<(bitness+4); }
/// Get number of address bytes
int abytes(void) const { return abits() / 8; }
/// \defgroup SFL_ Segment flags
/// \ingroup seg_t
/// Used by segment_t::flags
/* 24 */ ushort flags; ///< \ref SFL_
/// IDP dependent field (IBM PC: if set, ORG directive is not commented out)
/// \ingroup SFL_
#define SFL_COMORG 0x01
/// \name Segment flag: ORG directive
/// See #SFL_COMORG
//@{
bool comorg(void) const { return (flags & SFL_COMORG) != 0; }
void set_comorg(void) { flags |= SFL_COMORG; }
void clr_comorg(void) { flags &= ~SFL_COMORG; }
//@}
/// Orgbase is present? (IDP dependent field)
/// \ingroup SFL_
#define SFL_OBOK 0x02
/// \name Segment flag: orgbase
/// See #SFL_OBOK
//@{
bool ob_ok(void) const { return (flags & SFL_OBOK) != 0; }
void set_ob_ok(void) { flags |= SFL_OBOK; }
void clr_ob_ok(void) { flags &= ~SFL_OBOK; }
//@}
/// Is the segment hidden?
/// \ingroup SFL_
#define SFL_HIDDEN 0x04
/// \name Segment flag: hidden
/// See #SFL_HIDDEN
//@{
bool is_visible_segm(void) const { return (flags & SFL_HIDDEN) == 0; }
void set_visible_segm(bool visible) { setflag(flags, SFL_HIDDEN, !visible); }
//@}
/// Is the segment created for the debugger?.
/// Such segments are temporary and do not have permanent flags.
/// \ingroup SFL_
#define SFL_DEBUG 0x08
/// \name Segment flag: debugger segment
/// See #SFL_DEBUG
//@{
bool is_debugger_segm(void) const { return (flags & SFL_DEBUG) != 0; }
void set_debugger_segm(bool debseg) { setflag(flags, SFL_DEBUG, debseg); }
//@}
/// Is the segment created by the loader?
/// \ingroup SFL_
#define SFL_LOADER 0x10
/// \name Segment flag: loader segment
/// See #SFL_LOADER
//@{
bool is_loader_segm(void) const { return (flags & SFL_LOADER) != 0; }
void set_loader_segm(bool ldrseg) { setflag(flags, SFL_LOADER, ldrseg); }
//@}
/// Hide segment type (do not print it in the listing)
/// \ingroup SFL_
#define SFL_HIDETYPE 0x20
/// \name Segment flag: hide segment type
/// See #SFL_HIDETYPE
//@{
bool is_hidden_segtype(void) const { return (flags & SFL_HIDETYPE) != 0; }
void set_hidden_segtype(bool hide) { setflag(flags, SFL_HIDETYPE, hide); }
//@}
/// Header segment (do not create offsets to it in the disassembly)
/// \ingroup SFL_
#define SFL_HEADER 0x40
/// \name Segment flag: header segment
/// See #SFL_HEADER
//@{
bool is_header_segm(void) const { return (flags & SFL_HEADER) != 0; }
void set_header_segm(bool on) { setflag(flags, SFL_HEADER, on); }
//@}
/// Ephemeral segments are not analyzed automatically
/// (no flirt, no functions unless required, etc).
/// Most likely these segments will be destroyed at the end of the
/// debugging session unless the user changes their status.
bool is_ephemeral_segm(void) const
{ return (flags & (SFL_DEBUG|SFL_LOADER)) == SFL_DEBUG; }
/* 28 */ sel_t sel; ///< segment selector - should be unique. You can't
///< change this field after creating the segment.
///< Exception: 16bit OMF files may have several
///< segments with the same selector, but this is not
///< good (no way to denote a segment exactly)
///< so it should be fixed in the future.
/* 32 */ sel_t defsr[SREG_NUM];///< default segment register values.
///< first element of this array keeps information
///< about value of \ph{reg_first_sreg}
/* 96 */ uchar type; ///< segment type (see \ref SEG_).
///< The kernel treats different segment types differently.
///< Segments marked with '*' contain no instructions
///< or data and are not declared as 'segments' in
///< the disassembly.
/// \defgroup SEG_ Segment types
/// \ingroup seg_t
/// Used by segment_t::type
//@{
#define SEG_NORM 0 ///< unknown type, no assumptions
#define SEG_XTRN 1 ///< * segment with 'extern' definitions.
///< no instructions are allowed
#define SEG_CODE 2 ///< code segment
#define SEG_DATA 3 ///< data segment
#define SEG_IMP 4 ///< java: implementation segment
#define SEG_GRP 6 ///< * group of segments
#define SEG_NULL 7 ///< zero-length segment
#define SEG_UNDF 8 ///< undefined segment type (not used)
#define SEG_BSS 9 ///< uninitialized segment
#define SEG_ABSSYM 10 ///< * segment with definitions of absolute symbols
#define SEG_COMM 11 ///< * segment with communal definitions
#define SEG_IMEM 12 ///< internal processor memory & sfr (8051)
#define SEG_MAX_SEGTYPE_CODE SEG_IMEM
//@}
/* 100 */ bgcolor_t color; ///< the segment color
/// Update segment information. You must call this function after modification
/// of segment characteristics. Note that not all fields of segment structure
/// may be modified directly, there are special functions to modify some fields.
/// \return success
inline bool update(void);
/// Constructor
segment_t(void)
: name(0),
sclass(0),
orgbase(0),
align(0),
comb(0),
perm(0),
bitness(0),
flags(0),
sel(0),
type(SEG_NORM),
color(DEFCOLOR)
{
memset(defsr, 0, sizeof(defsr));
}
#ifndef SWIG
DECLARE_COMPARISONS(segment_t);
#endif
}; // total 104/192 bytes
#ifdef __EA64__
CASSERT(sizeof(segment_t) == 192);
#else
CASSERT(sizeof(segment_t) == 104);
#endif
/// See #SFL_HIDDEN
inline bool is_visible_segm(segment_t *s) { return s->is_visible_segm(); }
/// See #SFL_HIDDEN, #SCF_SHHID_SEGM
inline bool is_finally_visible_segm(segment_t *s)
{
return (inf_get_cmtflg() & SCF_SHHID_SEGM) != 0 || is_visible_segm(s);
}
/// See #SFL_HIDDEN
idaman void ida_export set_visible_segm(segment_t *s, bool visible);
/// Has segment a special type?.
/// (#SEG_XTRN, #SEG_GRP, #SEG_ABSSYM, #SEG_COMM)
idaman bool ida_export is_spec_segm(uchar seg_type);
/// Does the address belong to a segment with a special type?.
/// (#SEG_XTRN, #SEG_GRP, #SEG_ABSSYM, #SEG_COMM)
/// \param ea linear address
idaman bool ida_export is_spec_ea(ea_t ea);
/// Lock segment pointer
/// Locked pointers are guaranteed to remain valid until they are unlocked.
/// Ranges with locked pointers cannot be deleted or moved.
idaman void ida_export lock_segm(const segment_t *segm, bool lock);
/// Helper class to lock a segment pointer so it stays valid
class lock_segment
{
const segment_t *segm;
public:
lock_segment(const segment_t *_segm) : segm(_segm)
{
lock_segm(segm, true);
}
~lock_segment(void)
{
lock_segm(segm, false);
}
};
/// Is a segment pointer locked?
idaman bool ida_export is_segm_locked(const segment_t *segm);
//@} seg_t
//-------------------------------------------------------------------------
// S E G M E N T S E L E C T O R S
//
/// \defgroup seg_sel Segment selectors
/// \ingroup seg
/// The kernel maintains a table to translate selector values to
/// segment base paragraphs. A Paragraph is a 16byte quantity.
/// This table and translation is necessary because IBM PC uses
/// 16bit selectors in instructions but segments may reside anywhere
/// in the linear addressing space. For example, if a segment with
/// selector 5 resides at 0x400000, we need to have selector translation
/// 5 -> 0x400000.
/// For 16bit programs the selector translation table is usually empty,
/// selector values are equal to segment base paragraphs.
//@{
//-------------------------------------------------------------------------
/// Get description of selector (0..get_selector_qty()-1)
idaman bool ida_export getn_selector(sel_t *sel, ea_t *base, int n);
/// Get number of defined selectors
idaman size_t ida_export get_selector_qty(void);
/// Allocate a selector for a segment if necessary.
/// You must call this function before calling add_segm_ex().
/// add_segm() calls this function itself, so you don't need to
/// allocate a selector.
/// This function will allocate a selector if 'segbase' requires more than
/// 16 bits and the current processor is IBM PC.
/// Otherwise it will return the segbase value.
/// \param segbase a new segment base paragraph
/// \return the allocated selector number
idaman sel_t ida_export setup_selector(ea_t segbase);
/// Allocate a selector for a segment unconditionally.
/// You must call this function before calling add_segm_ex().
/// add_segm() calls this function itself, so you don't need to
/// allocate a selector.
/// This function will allocate a new free selector and setup its mapping
/// using find_free_selector() and set_selector() functions.
/// \param segbase a new segment base paragraph
/// \return the allocated selector number
idaman sel_t ida_export allocate_selector(ea_t segbase);
/// Find first unused selector.
/// \return a number >= 1
idaman sel_t ida_export find_free_selector(void);
/// Set mapping of selector to a paragraph.
/// You should call this function _before_ creating a segment
/// which uses the selector, otherwise the creation of the segment will fail.
/// \param selector number of selector to map
/// - if selector == #BADSEL, then return 0 (fail)
/// - if the selector has had a mapping, old mapping is destroyed
/// - if the selector number is equal to paragraph value, then the mapping is
/// destroyed because we don't need to keep trivial mappings.
/// \param paragraph paragraph to map selector
/// \retval 1 ok
/// \retval 0 failure (bad selector or too many mappings)
idaman int ida_export set_selector(sel_t selector, ea_t paragraph);
/// Delete mapping of a selector.
/// Be wary of deleting selectors that are being used in the program, this
/// can make a mess in the segments.
/// \param selector number of selector to remove from the translation table
idaman void ida_export del_selector(sel_t selector);
/// Get mapping of a selector.
/// \param selector number of selector to translate
/// \return paragraph the specified selector is mapped to.
/// if there is no mapping, returns 'selector'.
idaman ea_t ida_export sel2para(sel_t selector);
/// Get mapping of a selector as a linear address.
/// \param selector number of selector to translate to linear address
/// \return linear address the specified selector is mapped to.
/// if there is no mapping, returns to_ea(selector,0);
inline ea_t idaapi sel2ea(sel_t selector)
{
if ( selector == BADSEL )
return BADADDR;
return to_ea(sel2para(selector), 0);
}
/// Find a selector that has mapping to the specified paragraph.
/// \param base paragraph to search in the translation table
/// \return selector value or base
idaman sel_t ida_export find_selector(ea_t base);
/// Enumerate all selectors from the translation table.
/// This function calls 'func' for each selector in the translation table.
/// If 'func' returns non-zero code, enumeration is stopped and this code
/// is returned.
/// \param func callback function
/// - sel: selector number
/// - para: selector mapping
/// \return 0 or code returned by 'func'.
idaman int ida_export enumerate_selectors(int (idaapi *func)(sel_t sel,ea_t para));
/// Enumerate all segments with the specified selector.
/// This function will call the callback function 'func' for each
/// segment that has the specified selector. Enumeration starts
/// from the last segment and stops at the first segment (reverse order).
/// If the callback function 'func' returns a value != #BADADDR, the
/// enumeration is stopped and this value is returned to the caller.
/// \param selector segments that have this selector are enumerated
/// \param func callback function
/// - s: pointer to segment structure
/// - ud: user data
/// \param ud pointer to user data. this pointer will be passed
/// to the callback function
/// \return #BADADDR or the value returned by the callback function 'func'
idaman ea_t ida_export enumerate_segments_with_selector(
sel_t selector,
ea_t (idaapi *func)(segment_t *s, void *ud),
void *ud=NULL);
/// Get pointer to segment structure.
/// This function finds a segment by its selector. If there are several
/// segments with the same selectors, the last one will be returned.
/// \param selector a segment with the specified selector will be returned
/// \return pointer to segment or NULL
idaman segment_t *ida_export get_segm_by_sel(sel_t selector);
//@} seg_sel
//-------------------------------------------------------------------------
// S E G M E N T M A N I P U L A T I O N F U N C T I O N S
//-------------------------------------------------------------------------
/// \defgroup seg_man Segment manipulation functions
/// Add/Delete/Modify segments
/// \ingroup seg
//@{
/// Add a new segment.
/// If a segment already exists at the specified range of addresses,
/// this segment will be truncated. Instructions and data in the old
/// segment will be deleted if the new segment has another addressing
/// mode or another segment base address.
/// \param s pointer to filled segment structure.
/// segment selector should have proper mapping (see set_selector()).
/// - if s.start_ea==#BADADDR then s.start_ea <- get_segm_base(&s)
/// - if s.end_ea==#BADADDR, then a segment up to the next segment
/// will be created (if the next segment doesn't exist, then
/// 1 byte segment will be created).
/// - if the s.end_ea < s.start_ea, then fail.
/// - if s.end_ea is too high and the new segment would overlap
/// the next segment, s.end_ea is adjusted properly.
/// \param name name of new segment. may be NULL.
/// if specified, the segment is immediately renamed
/// \param sclass class of the segment. may be NULL.
/// if specified, the segment class is immediately changed
/// \param flags \ref ADDSEG_
/// \retval 1 ok
/// \retval 0 failed, a warning message is displayed
idaman bool ida_export add_segm_ex(
segment_t *NONNULL s,
const char *name,
const char *sclass,
int flags);
/// \defgroup ADDSEG_ Add segment flags
/// Passed as 'flags' parameter to add_segm_ex()
//@{
#define ADDSEG_NOSREG 0x0001 ///< set all default segment register values to #BADSEL
///< (undefine all default segment registers)
#define ADDSEG_OR_DIE 0x0002 ///< qexit() if can't add a segment
#define ADDSEG_NOTRUNC 0x0004 ///< don't truncate the new segment at the beginning of the next segment if they overlap.
///< destroy/truncate old segments instead.
#define ADDSEG_QUIET 0x0008 ///< silent mode, no "Adding segment..." in the messages window
#define ADDSEG_FILLGAP 0x0010 ///< fill gap between new segment and previous one.
///< i.e. if such a gap exists, and this gap is less
///< than 64K, then fill the gap by extending the
///< previous segment and adding .align directive
///< to it. This way we avoid gaps between segments.
///< too many gaps lead to a virtual array failure.
///< it cannot hold more than ~1000 gaps.
#define ADDSEG_SPARSE 0x0020 ///< use sparse storage method for the new ranges
///< of the created segment. please note that the
///< ranges that were already enabled before
///< creating the segment will not change their
///< storage type.
#define ADDSEG_NOAA 0x0040 ///< do not mark new segment for auto-analysis
#define ADDSEG_IDBENC 0x0080 ///< 'name' and 'sclass' are given in the IDB encoding;
///< non-ASCII bytes will be decoded accordingly
//@}
/// Add a new segment, second form.
/// Segment alignment is set to #saRelByte.
/// Segment combination is "public" or "stack" (if segment class is "STACK").
/// Addressing mode of segment is taken as default (16bit or 32bit).
/// Default segment registers are set to #BADSEL.
/// If a segment already exists at the specified range of addresses,
/// this segment will be truncated. Instructions and data in the old
/// segment will be deleted if the new segment has another addressing
/// mode or another segment base address.
/// \param para segment base paragraph.
/// if paragraph can't fit in 16bit, then a new selector is
/// allocated and mapped to the paragraph.
/// \param start start address of the segment.
/// if start==#BADADDR then start <- to_ea(para,0).
/// \param end end address of the segment. end address should be higher than
/// start address. For emulate empty segments, use #SEG_NULL segment
/// type. If the end address is lower than start address, then fail.
/// If end==#BADADDR, then a segment up to the next segment
/// will be created (if the next segment doesn't exist, then
/// 1 byte segment will be created).
/// If 'end' is too high and the new segment would overlap
/// the next segment, 'end' is adjusted properly.
/// \param name name of new segment. may be NULL
/// \param sclass class of the segment. may be NULL.
/// type of the new segment is modified if class is one of
/// predefined names:
/// - "CODE" -> #SEG_CODE
/// - "DATA" -> #SEG_DATA
/// - "CONST" -> #SEG_DATA
/// - "STACK" -> #SEG_BSS
/// - "BSS" -> #SEG_BSS
/// - "XTRN" -> #SEG_XTRN
/// - "COMM" -> #SEG_COMM
/// - "ABS" -> #SEG_ABSSYM
/// \retval 1 ok
/// \retval 0 failed, a warning message is displayed
idaman bool ida_export add_segm(
ea_t para,
ea_t start,
ea_t end,
const char *name,
const char *sclass,
int flags=0);
/// Delete a segment.
/// \param ea any address belonging to the segment
/// \param flags \ref SEGMOD_
/// \retval 1 ok
/// \retval 0 failed, no segment at 'ea'.
idaman bool ida_export del_segm(ea_t ea, int flags);
/// \defgroup SEGMOD_ Segment modification flags
/// Used by functions in \ref seg_man
//@{
#define SEGMOD_KILL 0x0001 ///< disable addresses if segment gets shrinked or deleted
#define SEGMOD_KEEP 0x0002 ///< keep information (code & data, etc)
#define SEGMOD_SILENT 0x0004 ///< be silent
#define SEGMOD_KEEP0 0x0008 ///< flag for internal use, don't set
#define SEGMOD_KEEPSEL 0x0010 ///< do not try to delete unused selector
#define SEGMOD_NOMOVE 0x0020 ///< don't move info from the start of segment to the new start address
///< (for set_segm_start())
#define SEGMOD_SPARSE 0x0040 ///< use sparse storage if extending the segment
///< (for set_segm_start(), set_segm_end())
//@}
/// Get number of segments
idaman int ida_export get_segm_qty(void);
/// Get pointer to segment by linear address.
/// \param ea linear address belonging to the segment
/// \return NULL or pointer to segment structure
idaman segment_t *ida_export getseg(ea_t ea);
/// Get pointer to segment by its number.
/// \warning Obsoleted because it can slow down the debugger (it has to refresh the whole
/// memory segmentation to calculate the correct answer)
/// \param n segment number in the range (0..get_segm_qty()-1)
/// \returns NULL or pointer to segment structure
idaman segment_t *ida_export getnseg(int n);
/// Get number of segment by address.
/// \param ea linear address belonging to the segment
/// \return -1 if no segment occupies the specified address.
/// otherwise returns number of the specified segment (0..get_segm_qty()-1)
idaman int ida_export get_segm_num(ea_t ea);
/// Get pointer to the next segment
idaman segment_t *ida_export get_next_seg(ea_t ea);
/// Get pointer to the previous segment
idaman segment_t *ida_export get_prev_seg(ea_t ea);
/// Get pointer to the first segment
idaman segment_t *ida_export get_first_seg(void);
/// Get pointer to the last segment
idaman segment_t *ida_export get_last_seg(void);
/// Get pointer to segment by its name.
/// If there are several segments with the same name, returns the first of them.
/// \param name segment name. may be NULL.
/// \return NULL or pointer to segment structure
idaman segment_t *ida_export get_segm_by_name(const char *name);
/// Set segment end address.
/// The next segment is shrinked to allow expansion of the specified segment.
/// The kernel might even delete the next segment if necessary.
/// The kernel will ask the user for a permission to destroy instructions
/// or data going out of segment scope if such instructions exist.
/// \param ea any address belonging to the segment
/// \param newend new end address of the segment
/// \param flags \ref SEGMOD_
/// \retval 1 ok
/// \retval 0 failed, a warning message is displayed
idaman bool ida_export set_segm_end(ea_t ea, ea_t newend, int flags);
/// Set segment start address.
/// The previous segment is trimmed to allow expansion of the specified segment.
/// The kernel might even delete the previous segment if necessary.
/// The kernel will ask the user for a permission to destroy instructions
/// or data going out of segment scope if such instructions exist.
/// \param ea any address belonging to the segment
/// \param newstart new start address of the segment
/// note that segment start address should be higher than
/// segment base linear address.
/// \param flags \ref SEGMOD_
/// \retval 1 ok
/// \retval 0 failed, a warning message is displayed
idaman bool ida_export set_segm_start(ea_t ea, ea_t newstart, int flags);
/// Move segment start.
/// The main difference between this function and set_segm_start() is
/// that this function may expand the previous segment while set_segm_start()
/// never does it. So, this function allows to change bounds of two segments
/// simultaneously. If the previous segment and the specified segment
/// have the same addressing mode and segment base, then instructions
/// and data are not destroyed - they simply move from one segment
/// to another. Otherwise all instructions/data which migrate
/// from one segment to another are destroyed.
/// \note this function never disables addresses.
/// \param ea any address belonging to the segment
/// \param newstart new start address of the segment
/// note that segment start address should be higher than
/// segment base linear address.
/// \param mode policy for destroying defined items
/// - 0: if it is necessary to destroy defined items,
/// display a dialog box and ask confirmation
/// - 1: if it is necessary to destroy defined items,
/// just destroy them without asking the user
/// - -1: if it is necessary to destroy defined items,
/// don't destroy them (i.e. function will fail)
/// - -2: don't destroy defined items (function will succeed)
/// \retval 1 ok
/// \retval 0 failed, a warning message is displayed
idaman bool ida_export move_segm_start(ea_t ea, ea_t newstart, int mode);
/// Move a segment to a new address.
/// This function moves all information to the new address.
/// It fixes up address sensitive information in the kernel.
/// The total effect is equal to reloading the segment to the target address.
/// For the file format dependent address sensitive information, loader_t::move_segm is called.
/// Also IDB notification event idb_event::segm_moved is called.
/// \param s segment to move
/// \param to new segment start address
/// \param flags \ref MSF_
/// \return \ref MOVE_SEGM_
idaman int ida_export move_segm(segment_t *s, ea_t to, int flags=0);
/// \defgroup MSF_ Move segment flags
/// Passed as 'flags' parameter to move_segm() and rebase_program()
//@{
#define MSF_SILENT 0x0001 ///< don't display a "please wait" box on the screen
#define MSF_NOFIX 0x0002 ///< don't call the loader to fix relocations
#define MSF_LDKEEP 0x0004 ///< keep the loader in the memory (optimization)
#define MSF_FIXONCE 0x0008 ///< call loader only once with the special calling method.
///< valid for rebase_program(). see loader_t::move_segm.
#define MSF_PRIORITY 0x0020 ///< loader segments will overwrite any existing debugger segments when moved.
///< valid for move_segm()
#define MSF_NETNODES 0x0080 ///< move netnodes instead of changing inf.netdelta (this is slower)
///< valid for rebase_program()
//@}
/// \defgroup MOVE_SEGM_ Move segment result codes
/// Return values for move_segm() add rebase_program()
//@{
#define MOVE_SEGM_OK 0 ///< all ok
#define MOVE_SEGM_PARAM -1 ///< The specified segment does not exist
#define MOVE_SEGM_ROOM -2 ///< Not enough free room at the target address
#define MOVE_SEGM_IDP -3 ///< IDP module forbids moving the segment
#define MOVE_SEGM_CHUNK -4 ///< Too many chunks are defined, can't move
#define MOVE_SEGM_LOADER -5 ///< The segment has been moved but the loader complained
#define MOVE_SEGM_ODD -6 ///< Cannot move segments by an odd number of bytes
#define MOVE_SEGM_ORPHAN -7 ///< Orphan bytes hinder segment movement
#define MOVE_SEGM_DEBUG -8 ///< Debugger segments cannot be moved
//@}
/// Rebase the whole program by 'delta' bytes.
/// \param delta number of bytes to move the program
/// \param flags \ref MSF_
/// it is recommended to use #MSF_FIXONCE so that the loader takes
/// care of global variables it stored in the database
/// \return \ref MOVE_SEGM_
idaman int ida_export rebase_program(adiff_t delta, int flags);
/// Convert a debugger segment to a regular segment and vice versa.
/// When converting debug->regular, the memory contents will be copied
/// to the database.
/// \param s segment to modify
/// \param is_deb_segm new status of the segment
/// \return \ref CSS_
idaman int ida_export change_segment_status(segment_t *s, bool is_deb_segm);
/// \defgroup CSS_ Change segment status result codes
/// Return values for change_segment_status()
//@{
#define CSS_OK 0 ///< ok
#define CSS_NODBG -1 ///< debugger is not running
#define CSS_NORANGE -2 ///< could not find corresponding memory range
#define CSS_NOMEM -3 ///< not enough memory (might be because the segment
///< is too big)
#define CSS_BREAK -4 ///< memory reading process stopped by user
//@}
/// Take a memory snapshot of the running process.
/// \param only_loader_segs only is_loader_segm() segments will be affected
/// \return success
idaman bool ida_export take_memory_snapshot(bool only_loader_segs);
/// Is the database a miniidb created by the debugger?.
/// \return true if the database contains no segments
/// or only debugger segments
idaman bool ida_export is_miniidb(void);
/// Internal function
idaman bool ida_export set_segm_base(segment_t *s, ea_t newbase);
//@} seg_man
//-------------------------------------------------------------------------
// S E G M E N T G R O U P S
//-------------------------------------------------------------------------
/// \defgroup seg_grp Segment groups
/// \ingroup seg
//@{
/// Create a new group of segments (used OMF files).
/// \param grp selector of group segment (segment type is #SEG_GRP)
/// You should create an 'empty' (1 byte) group segment
/// It won't contain anything and will be used to
/// redirect references to the group of segments to the
/// common selector.
/// \param sel common selector of all segments belonging to the segment
/// You should create all segments within the group with the
/// same selector value.
/// \return 1 ok
/// \return 0 too many groups (see #MAX_GROUPS)
idaman int ida_export set_group_selector(sel_t grp, sel_t sel);
#define MAX_GROUPS 8 ///< max number of segment groups
/// Get common selector for a group of segments.
/// \param grpsel selector of group segment
/// \return common selector of the group or 'grpsel' if no such group is found
idaman sel_t ida_export get_group_selector(sel_t grpsel);
//@} seg_grp
//-------------------------------------------------------------------------
// S E G M E N T T R A N S L A T I O N S
///
/// \defgroup seg_trans Segment translations
/// \ingroup seg
///
/// Used to represent overlayed memory banks.
/// Segment translations are used to redirect access to overlayed segments
/// so that the correct overlay is accessed. Each segment has its own
/// translation list. For example, suppose we have
/// four segments:
/// <pre>
/// A 1000-2000
/// B 1000-2000
/// C 2000-3000
/// D 2000-3000
/// </pre>
/// A and B occupy the same virtual addresses. The same with C and D.
/// Segment A works with segment C, segment B works with segment D.
///
/// So all references from A to 2000-3000 should go to C. For this
/// we add translation C for segment A. The same with B,D: add
/// translation D for segment B. Also, we need to specify the correct
/// segment to be accessed from C, thus we add translation A for segment C.
/// And we add translation B for segment D.
///
/// After this, all references to virtual addresses 2000-3000 made from A
/// go to segment C (even if segment A would be large and occupy 1000-3000)
/// So, we need the following translations:
/// <pre>
/// A: C
/// B: D
/// C: A
/// D: B
/// </pre>
/// With translations, the segments may reside at any linear addresses,
/// all references will pass through the translation mechanism and go to the
/// correct segment.
///
/// Segment translation works only for code segments (see map_code_ea())
//@{
//-------------------------------------------------------------------------
/// Add segment translation.
/// \param segstart start address of the segment to add translation to
/// \param mappedseg start address of the overlayed segment
/// \retval 1 ok
/// \retval 0 too many translations or bad segstart
idaman bool ida_export add_segment_translation(ea_t segstart, ea_t mappedseg);
#define MAX_SEGM_TRANSLATIONS 64 ///< max number of segment translations
/// Set new translation list.
/// \param segstart start address of the segment to add translation to
/// \param transmap vector of segment start addresses for the translation list.
/// If transmap is empty, the translation list is deleted.
/// \retval 1 ok
/// \retval 0 too many translations or bad segstart
idaman bool ida_export set_segment_translations(ea_t segstart, const eavec_t &transmap);
/// Delete the translation list
/// \param segstart start address of the segment to delete translation list
idaman void ida_export del_segment_translations(ea_t segstart);
/// Get segment translation list.
/// \param transmap vector of segment start addresses for the translation list
/// \param segstart start address of the segment to get information about
/// \return -1 if no translation list or bad segstart.
/// otherwise returns size of translation list.
idaman ssize_t ida_export get_segment_translations(eavec_t *transmap, ea_t segstart);
//@} seg_trans
//-------------------------------------------------------------------------
// S E G M E N T C O M M E N T S
//
/// \defgroup seg_cmt Segment comments
/// \ingroup seg
///
/// Segment comments are rarely used yet.
/// The user may define a segment comment by pressing ':'
/// while standing on the segment name at the segment start.
///
/// The main advantage of segment comments compared to anterior
/// lines (see lines.hpp) is that they are attached to a segment,
/// not to an address and they will move with the start of segment
/// if the segment boundaries change.
///
/// You may set segment comments in your LDR module to describe
/// characteristics of a segment in comments.
///
/// Repeatable segment comments are not used at all, because I don't
/// know where they should be repeated.
//@{
//-------------------------------------------------------------------------
/// Get segment comment.
/// \param buf buffer for the comment
/// \param s pointer to segment structure
/// \param repeatable 0: get regular comment.
/// 1: get repeatable comment.
/// \return size of comment or -1
idaman ssize_t ida_export get_segment_cmt(qstring *buf, const segment_t *s, bool repeatable);
/// Set segment comment.
/// \param s pointer to segment structure
/// \param cmt comment string, may be multiline (with '\n').
/// maximal size is 4096 bytes.
/// Use empty str ("") to delete comment
/// \param repeatable 0: set regular comment.
/// 1: set repeatable comment.
///
idaman void ida_export set_segment_cmt(const segment_t *s, const char *cmt, bool repeatable);
/// Generate segment footer line as a comment line.
/// This function may be used in IDP modules to generate segment footer
/// if the target assembler doesn't have 'ends' directive.
idaman void ida_export std_out_segm_footer(struct outctx_t &ctx, segment_t *seg);
//@} seg_cmt
//-------------------------------------------------------------------------
// S E G M E N T N A M E S
//-------------------------------------------------------------------------
/// \defgroup seg_name Segment names
/// \ingroup seg
/// Various ways to retrieve the name of a segment
//@{
/// Rename segment.
/// The new name is validated (see validate_name).
/// A segment always has a name. If you hadn't specified a name,
/// the kernel will assign it "seg###" name where ### is segment number.
/// \param s pointer to segment (may be NULL)
/// \param name new segment name
/// \param flags ADDSEG_IDBENC or 0
/// \retval 1 ok, name is good and segment is renamed
/// \retval 0 failure, name is bad or segment is NULL
idaman int ida_export set_segm_name(
segment_t *s,
const char *name,
int flags=0);
/// Get true segment name by pointer to segment.
/// \param buf output buffer. cannot be NULL
/// \param s pointer to segment
/// \param flags 0-return name as is; 1-substitute bad symbols with _
/// 1 corresponds to GN_VISIBLE
/// \return size of segment name (-1 if s==NULL)
idaman ssize_t ida_export get_segm_name(qstring *buf, const segment_t *s, int flags=0);
/// Get segment name by pointer to segment.
/// \param buf output buffer. cannot be NULL
/// \param s pointer to segment
/// \return size of segment name (-1 if s==NULL)
inline ssize_t idaapi get_visible_segm_name(qstring *buf, const segment_t *s)
{
return get_segm_name(buf, s, 1);
}
/// Get colored segment name expression in the form (segname + displacement).
/// \param buf output buffer to hold segment expression
/// \param from linear address of instruction operand or data referring to
/// the name. This address will be used to get fixup information,
/// so it should point to exact position of operand in the
/// instruction.
/// \param sel value to convert to segment expression
/// \return size of segment expression or -1
ssize_t get_segm_expr(qstring *buf, ea_t from, sel_t sel);
//@} seg_name
//-------------------------------------------------------------------------
// S E G M E N T C L A S S E S A N D T Y P E S
//-------------------------------------------------------------------------
/// \defgroup seg_type Segment classes and types
/// \ingroup seg
/// See \ref SEG_
//@{
/// Get segment class.
/// Segment class is arbitrary text (max 8 characters).
/// \param buf output buffer. cannot be NULL.
/// \param s pointer to segment
/// \return size of segment class (-1 if s==NULL or bufsize<=0)
idaman ssize_t ida_export get_segm_class(qstring *buf, const segment_t *s);
/// Set segment class.
/// \param s pointer to segment (may be NULL)
/// \param sclass segment class (may be NULL).
/// If segment type is #SEG_NORM and segment class is one of predefined
/// names, then segment type is changed to:
/// - "CODE" -> #SEG_CODE
/// - "DATA" -> #SEG_DATA
/// - "STACK" -> #SEG_BSS
/// - "BSS" -> #SEG_BSS
/// - if "UNK" then segment type is reset to #SEG_NORM.
/// \retval 1 ok, name is good and segment is renamed
/// \retval 0 failure, name is NULL or bad or segment is NULL
idaman int ida_export set_segm_class(segment_t *s, const char *sclass, int flags=0);
/// Get segment type.
/// \param ea any linear address within the segment
/// \return \ref SEG_, #SEG_UNDF if no segment found at 'ea'
idaman uchar ida_export segtype(ea_t ea);
//@} seg_type
//-------------------------------------------------------------------------
// S E G M E N T A L I G N M E N T A N D C O M B I N A T I O N
//-------------------------------------------------------------------------
/// \defgroup seg_align Segment alignment and combination
/// \ingroup seg
//@{
/// Get text representation of segment alignment code.
/// \return text digestable by IBM PC assembler.
idaman const char *ida_export get_segment_alignment(uchar align);
/// Get text representation of segment combination code.
/// \return text digestable by IBM PC assembler.
idaman const char *ida_export get_segment_combination(uchar comb);
//@} seg_align
//-------------------------------------------------------------------------
// S E G M E N T A D D R E S S I N G
//-------------------------------------------------------------------------
/// \defgroup seg_addr Segment addressing
/// \ingroup seg
//@{
/// Get segment base paragraph.
/// Segment base paragraph may be converted to segment base linear address
/// using to_ea() function.
/// In fact, to_ea(get_segm_para(s), 0) == get_segm_base(s).
/// \param s pointer to segment
/// \return 0 if s == NULL,
/// the segment base paragraph
idaman ea_t ida_export get_segm_para(const segment_t *s);
/// Get segment base linear address.
/// Segment base linear address is used to calculate virtual addresses.
/// The virtual address of the first byte of the segment will be
/// (start address of segment - segment base linear address)
/// \param s pointer to segment
/// \return 0 if s == NULL,
/// otherwise segment base linear address
idaman ea_t ida_export get_segm_base(const segment_t *s);
/// Change segment addressing mode (16, 32, 64 bits).
/// You must use this function to change segment addressing, never change
/// the 'bitness' field directly.
/// This function will delete all instructions, comments and names in the segment
/// \param s pointer to segment
/// \param bitness new addressing mode of segment
/// - 2: 64bit segment
/// - 1: 32bit segment
/// - 0: 16bit segment
/// \return success
idaman bool ida_export set_segm_addressing(segment_t *s, size_t bitness);
//@} seg_addr
//-----------------------------------------------------------------------
/// Does the address belong to a debug segment?
inline bool is_debugger_segm(ea_t ea)
{
segment_t *s = getseg(ea);
return s != NULL && s->is_debugger_segm();
}
/// Does the address belong to an ephemeral segment?
inline bool is_ephemeral_segm(ea_t ea)
{
segment_t *s = getseg(ea);
return s != NULL && s->is_ephemeral_segm();
}
//-------------------------------------------------------------------------
inline ea_t correct_address(ea_t ea, ea_t from, ea_t to, ea_t size, bool skip_check=false)
{
if ( skip_check || (ea >= from && ea < from+size) )
ea += to - from;
return ea;
}
//-------------------------------------------------------------------------
idaman bool ida_export update_segm(segment_t *s);
inline bool segment_t::update(void)
{
return update_segm(this);
}
/// Truncate and sign extend a delta depending on the segment
idaman adiff_t ida_export segm_adjust_diff(const segment_t *s, adiff_t delta);
/// Truncate an address depending on the segment
idaman ea_t ida_export segm_adjust_ea(const segment_t *s, ea_t ea);
#endif // _SEGMENT_HPP
Reference in New Issue View Git Blame Copy Permalink