2020 May 30 Breaking Changes Update (#9215)

* Branch point for 2020 May 30 Breaking Change

* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)

* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)

* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)

* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)

* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)

* Convert V-USB usbdrv to a submodule (#8321)

* Unify Tap Hold functions and documentation (#8348)

* Changing board names to prevent confusion (#8412)

* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)

* Move spaceman keyboards (#8830)

* Migrate miscellaneous `fn_actions` entries (#8977)

* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)

* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)

* Refactor Lily58 to use split_common (#6260)

* Refactor zinc to use split_common (#7114)

* Add a message if bin/qmk doesn't work (#9000)

* Fix conflicting types for 'tfp_printf' (#8269)

* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)

* Refactor and updates to TKC1800 code (#8472)

* Switch to qmk forks for everything (#9019)

* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)

* Audio enable corrections (2/3) (#8903)

* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)

* Audio enable corrections (Part 4) (#8974)

* Fix typo from PR7114 (#9171)

* Augment future branch Changelogs (#8978)

* Revert "Branch point for 2020 May 30 Breaking Change"

keyboards/zinc/keymaps/ginjake/config.h

@@ -20,8 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #pragma once
-// if you need more program area, try uncomment follow line
-#include "serial_config_simpleapi.h"
 
 // place overrides here
 // Selection of RGBLIGHT MODE to use.

keyboards/zinc/keymaps/ginjake/rules.mk

@@ -1,12 +1,11 @@
-
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
 NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
@@ -21,6 +20,8 @@ define ZINC_CUSTOMISE_MSG
   $(info Zinc customize)
   $(info -  LED_BACK_ENABLE=$(LED_BACK_ENABLE))
   $(info -  LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE))
+  $(info -  LED_BOTH_ENABLE=$(LED_BOTH_ENABLE))
+  $(info -  LED_RGB_CONT=$(LED_RGB_CONT))
   $(info -  LED_ANIMATION=$(LED_ANIMATIONS))
   $(info -  IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE))
 endef
@@ -28,6 +29,8 @@ endef
 # Zinc keyboard customize
 LED_BACK_ENABLE = no        # LED backlight (Enable SK6812mini backlight)
 LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight)
+LED_BOTH_ENABLE = no        # LED backlight and underglow
+LED_RGB_CONT = no           # LED continuous backlight or/and underglow between left Zinc and right Zinc
 LED_ANIMATIONS = yes        # LED animations
 IOS_DEVICE_ENABLE = no      # connect to IOS device (iPad,iPhone)
 Link_Time_Optimization = no # if firmware size over limit, try this option
@@ -37,7 +40,7 @@ Link_Time_Optimization = no # if firmware size over limit, try this option
 
 ### Zinc keyboard 'default' keymap: convenient command line option
 ##    make ZINC=<options> zinc:defualt
-##    option= back | under | na | ios
+##    option= back | under | both | cont | na | ios
 ##    ex.
 ##      make ZINC=under    zinc:defualt
 ##      make ZINC=under,ios zinc:defualt
@@ -48,9 +51,16 @@ Link_Time_Optimization = no # if firmware size over limit, try this option
 ifneq ($(strip $(ZINC)),)
   ifeq ($(findstring back,$(ZINC)), back)
     LED_BACK_ENABLE = yes
-  else ifeq ($(findstring under,$(ZINC)), under)
+  endif
+  ifeq ($(findstring under,$(ZINC)), under)
     LED_UNDERGLOW_ENABLE = yes
   endif
+  ifeq ($(findstring both,$(ZINC)), both)
+    LED_BOTH_ENABLE = yes
+  endif
+  ifeq ($(findstring cont,$(ZINC)), cont)
+    LED_RGB_CONT = yes
+  endif
   ifeq ($(findstring na,$(ZINC)), na)
     LED_ANIMATIONS = no
   endif
@@ -63,10 +73,11 @@ endif
 
 ifeq ($(strip $(LED_BACK_ENABLE)), yes)
   RGBLIGHT_ENABLE = yes
-  OPT_DEFS += -DRGBLED_BACK
   ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
-    $(eval $(call ZINC_CUSTOMISE_MSG))
-    $(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes')
+    OPT_DEFS += -DRGBLED_BOTH
+    $(info LED_BOTH_ENABLE option is enabled instead of LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE)
+  else
+    OPT_DEFS += -DRGBLED_BACK
   endif
 else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
   RGBLIGHT_ENABLE = yes
@@ -74,18 +85,27 @@ else
   RGBLIGHT_ENABLE = no
 endif
 
+ifeq ($(strip $(LED_BOTH_ENABLE)), yes)
+  RGBLIGHT_ENABLE = yes
+  OPT_DEFS += -DRGBLED_BOTH
+endif
+
+ifeq ($(strip $(LED_RGB_CONT)), yes)
+  OPT_DEFS += -DRGBLED_CONT
+endif
+
 ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
-    OPT_DEFS += -DIOS_DEVICE_ENABLE
+  OPT_DEFS += -DIOS_DEVICE_ENABLE
 endif
 
 ifeq ($(strip $(LED_ANIMATIONS)), yes)
-#    OPT_DEFS += -DRGBLIGHT_ANIMATIONS
-     OPT_DEFS += -DLED_ANIMATIONS
+# OPT_DEFS += -DRGBLIGHT_ANIMATIONS
+  OPT_DEFS += -DLED_ANIMATIONS
 
 endif
 
 ifeq ($(strip $(Link_Time_Optimization)),yes)
-    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
+  EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
 endif
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE