2020 May 30 Breaking Changes Update (#9215)

* Branch point for 2020 May 30 Breaking Change * Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954) * Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957) * Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958) * Migrate `ACTION_LAYER_MODS` to `LM()` (#8959) * Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968) * Convert V-USB usbdrv to a submodule (#8321) * Unify Tap Hold functions and documentation (#8348) * Changing board names to prevent confusion (#8412) * Move the Keyboardio Model01 to a keyboardio/ subdir (#8499) * Move spaceman keyboards (#8830) * Migrate miscellaneous `fn_actions` entries (#8977) * Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979) * Organizing my keyboards (plaid, tartan, ergoinu) (#8537) * Refactor Lily58 to use split_common (#6260) * Refactor zinc to use split_common (#7114) * Add a message if bin/qmk doesn't work (#9000) * Fix conflicting types for 'tfp_printf' (#8269) * Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480) * Refactor and updates to TKC1800 code (#8472) * Switch to qmk forks for everything (#9019) * audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484) * Audio enable corrections (2/3) (#8903) * Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582) * Audio enable corrections (Part 4) (#8974) * Fix typo from PR7114 (#9171) * Augment future branch Changelogs (#8978) * Revert "Branch point for 2020 May 30 Breaking Change"
2020-05-30 13:14:59 -07:00
parent 7b8a013826
commit fced377ac0
460 changed files with 2624 additions and 12709 deletions
--- a/keyboards/dm9records/ergoinu/config.h
+++ b/keyboards/dm9records/ergoinu/config.h
@@ -0,0 +1,109 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2018 Takuya Urakawa<twitter:@hsgw>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+#include <serial_config.h>
+
+/* USB Device descriptor parameter
+   VID & PID are lisenced from microchip sublisence program, Don't use other project! */
+#define VENDOR_ID       0x04D8
+#define PRODUCT_ID      0xEE60
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Dm9Records
+#define PRODUCT         ergoinu
+#define DESCRIPTION     An (Not Portable But Small) Ergonomic split keyboard
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
+#define USE_SERIAL
+
+/* Select hand configuration */
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_ROW_PINS { F6, F7, B1, B3, B2 }
+
+// wiring of each half
+#define MATRIX_COLS 7
+#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, F5, F4 }
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN B6
+
+#define RGBLED_NUM 7
+
+#ifndef IOS_DEVICE_ENABLE
+  #if RGBLED_NUM <= 7
+    #define RGBLIGHT_LIMIT_VAL 255
+    #define RGBLIGHT_VAL_STEP 17
+  #endif
+#else
+  #define RGBLIGHT_LIMIT_VAL 90
+  #define RGBLIGHT_VAL_STEP 4
+#endif
+
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+
+#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
+  #define USB_MAX_POWER_CONSUMPTION 500
+#else
+  // fix iPhone and iPad power adapter issue
+  // iOS device need lessthan 100
+  #define USB_MAX_POWER_CONSUMPTION 100
+#endif
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
--- a/keyboards/dm9records/ergoinu/ergoinu.c
+++ b/keyboards/dm9records/ergoinu/ergoinu.c
@@ -0,0 +1,5 @@
+#include "ergoinu.h"
+
+void matrix_init_kb(void) {
+	matrix_init_user();
+};
--- a/keyboards/dm9records/ergoinu/ergoinu.h
+++ b/keyboards/dm9records/ergoinu/ergoinu.h
@@ -0,0 +1,44 @@
+/*
+Copyright 2018 Takuya Urakawa<twitter:@hsgw>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include "ws2812.h"
+#endif
+
+#define LAYOUT( \
+  L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+  L07, L08, L09, L10, L11, L12, L13, R07, R08, R09, R10, R11, R12, R13, \
+  L14,      L15, L16, L17, L18, L19, R14, R15, R16, R17, R18, R19, R20, \
+  L20,      L21, L22, L23, L24, L25, R21, R22, R23, R24, R25, R26, R27,\
+            L26, L27, L28, L29, L30, R28, R29, R30, R31, R32 \
+  ) { \
+    { L00, L01, L02, L03, L04, L05, L06 }, \
+    { L07, L08, L09, L10, L11, L12, L13 }, \
+    { L14, KC_NO, L15, L16, L17, L18, L19 }, \
+    { L20, KC_NO, L21, L22, L23, L24, L25 }, \
+    { KC_NO, KC_NO, L26, L27, L28, L29, L30}, \
+    { R06, R05, R04, R03, R02, R01, R00 }, \
+    { R13, R12, R11, R10, R09, R08, R07 }, \
+    { R20, R19, R18, R17, R16, R15, R14 }, \
+    { R27, R26, R25, R24, R23, R22, R21 }, \
+    { KC_NO, KC_NO, R32, R31, R30, R29, R28 } \
+  }
+
--- a/keyboards/dm9records/ergoinu/info.json
+++ b/keyboards/dm9records/ergoinu/info.json
@@ -0,0 +1,87 @@
+{
+  "keyboard_name": "Ergoinu",
+  "url": "",
+  "maintainer": "hsgw(Takuya Urakawa)",
+  "width": 18,
+  "height": 5.4,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 64,
+      "layout": [
+        { "x": 0, "y": 0.6, "label": "ESC" },
+        { "x": 1, "y": 0.4, "label": "1" },
+        { "x": 2, "y": 0.4, "label": "2" },
+        { "x": 3, "y": 0.25, "label": "3" },
+        { "x": 4, "y": 0, "label": "4" },
+        { "x": 5, "y": 0.25, "label": "5" },
+        { "x": 6, "y": 0.4, "label": "6" },
+
+        { "x": 11, "y": 0.4, "label": "7" },
+        { "x": 12, "y": 0.25, "label": "8" },
+        { "x": 13, "y": 0, "label": "9" },
+        { "x": 14, "y": 0.25, "label": "0" },
+        { "x": 15, "y": 0.4, "label": "MINUS" },
+        { "x": 16, "y": 0.4, "label": "EQUAL" },
+        { "x": 17, "y": 0.6, "label": "BACKSLASH" },
+
+        { "x": 0, "y": 1.6, "label": "DELETE" },
+        { "x": 1, "y": 1.4, "label": "TAB" },
+        { "x": 2, "y": 1.4, "label": "Q" },
+        { "x": 3, "y": 1.25, "label": "W" },
+        { "x": 4, "y": 1, "label": "E" },
+        { "x": 5, "y": 1.25, "label": "R" },
+        { "x": 6, "y": 1.4, "label": "T" },
+
+        { "x": 11, "y": 1.4, "label": "Y" },
+        { "x": 12, "y": 1.25, "label": "U" },
+        { "x": 13, "y": 1, "label": "I" },
+        { "x": 14, "y": 1.25, "label": "O" },
+        { "x": 15, "y": 1.4, "label": "P" },
+        { "x": 16, "y": 1.4, "label": "LBRACKET" },
+        { "x": 17, "y": 1.6, "label": "RBRACKET" },
+
+        { "x": 0.25, "y": 2.6, "w": 1.75, "label": "LCTRL" },
+        { "x": 2, "y": 2.4, "label": "A" },
+        { "x": 3, "y": 2.25, "label": "S" },
+        { "x": 4, "y": 2, "label": "D" },
+        { "x": 5, "y": 2.25, "label": "F" },
+        { "x": 6, "y": 2.4, "label": "G" },
+
+        { "x": 11, "y": 2.4, "label": "H" },
+        { "x": 12, "y": 2.25, "label": "J" },
+        { "x": 13, "y": 2, "label": "K" },
+        { "x": 14, "y": 2.25, "label": "L" },
+        { "x": 15, "y": 2.4, "label": "SEMICOLON" },
+        { "x": 16, "y": 2.4, "label": "QUOTE" },
+        { "x": 17, "y": 2.6, "label": "GRAVE" },
+
+        { "x": 0.25, "y": 3.6, "w": 1.75, "label": "LSHIFT" },
+        { "x": 2, "y": 3.4, "label": "Z" },
+        { "x": 3, "y": 3.25, "label": "X" },
+        { "x": 4, "y": 3, "label": "C" },
+        { "x": 5, "y": 3.25, "label": "V" },
+        { "x": 6, "y": 3.4, "label": "B" },
+
+        { "x": 11, "y": 3.4, "label": "N" },
+        { "x": 12, "y": 3.25, "label": "M" },
+        { "x": 13, "y": 3, "label": "COMMA" },
+        { "x": 14, "y": 3.25, "label": "DOT" },
+        { "x": 15, "y": 3.4, "label": "SLASH" },
+        { "x": 16, "y": 3.4, "label": "RSHIFT" },
+        { "x": 17, "y": 3.6, "label": "RSHIFT" },
+
+        { "x": 3, "y": 4.25, "label": "MO(META)" },
+        { "x": 4, "y": 4, "label": "LALT" },
+        { "x": 5, "y": 4.25, "label": "LGUI" },
+        { "x": 6, "y": 4.4, "label": "ENT" },
+        { "x": 7, "y": 4.4, "w": 1.5, "label": "SPACE" },
+
+        { "x": 9.5, "y": 4.4, "w": 1.5, "label": "ENTER" },
+        { "x": 11, "y": 4.4, "label": "BACKSPACE" },
+        { "x": 12, "y": 4.25, "label": "RGUI" },
+        { "x": 13, "y": 4, "label": "RALT" },
+        { "x": 14, "y": 4.25, "label": "MO(META)" }
+      ]
+    }
+  }
+}
--- a/keyboards/dm9records/ergoinu/keymaps/default/config.h
+++ b/keyboards/dm9records/ergoinu/keymaps/default/config.h
@@ -0,0 +1,24 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2018 Takuya Urakawa <Twitter:@hsgw>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define RGBLIGHT_ANIMATIONS
--- a/keyboards/dm9records/ergoinu/keymaps/default/keymap.c
+++ b/keyboards/dm9records/ergoinu/keymaps/default/keymap.c
@@ -0,0 +1,101 @@
+#include QMK_KEYBOARD_H
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+#define JA_CLON KC_QUOT  // : and +
+#define JA_AT   KC_LBRC  // @ and `
+#define JA_HAT  KC_EQL   // ^ and ~
+#define JA_ENUN KC_RO    // \ and _ (EN mark and UNder score)
+#define JA_ENVL KC_JYEN  // \ and | (EN mark and Vertical Line)
+#define JA_LBRC KC_RBRC  // [ and {
+#define JA_RBRC KC_BSLS  // ] and }
+
+enum LAYER_NO {
+  BASE = 0,
+  META,
+  CONF
+};
+
+enum CUSTOM_KEYCODES {
+  RGB_RST = SAFE_RANGE,
+  RGB_TYPE,
+};
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+#define XXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [BASE] = LAYOUT( \
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,     KC_5,    KC_6,    KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSLS, \
+    KC_DEL,  KC_TAB,  KC_Q,    KC_W,    KC_E,     KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC, \
+    KC_LCTL,          KC_A,    KC_S,    KC_D,     KC_F,    KC_G,    KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_GRV, \
+    KC_LSFT,          KC_Z,    KC_X,    KC_C,     KC_V,    KC_B,    KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,  KC_RSFT, \
+                      MO(META),KC_LALT, KC_LGUI,  KC_ENT,  KC_SPC,  KC_ENT, KC_BSPC, KC_RGUI, KC_RALT, MO(META) \
+  ),
+
+  [META] = LAYOUT( \
+    MO(CONF),KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS, \
+    ______,  KC_CAPS, ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_SLCK, KC_PSCR, KC_HOME, KC_END, \
+    ______,           ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_PAUS, KC_PGUP, KC_UP,   KC_PGDN, \
+    ______,           ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_LEFT, KC_DOWN, KC_RGHT, \
+                      ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______, ______ \
+  ),
+ [CONF] = LAYOUT( \
+    ______,  RGB_TYPE,RGB_MOD,  RGB_VAI, RGB_HUI, RGB_HUI,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX, \
+    RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX, \
+    XXXXXX,           XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX, \
+    XXXXXX,           XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX, \
+                      XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX \
+  )
+};
+
+bool enableLEDTypeAnime = false;
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch(keycode) {
+    case RGB_RST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+        }
+      #endif
+      break;
+    case RGB_MOD:
+      #ifdef RGBLIGHT_ENABLE
+          if (record->event.pressed) {
+            enableLEDTypeAnime = false;
+            rgblight_step();
+          }
+      #endif
+      return false;
+    case RGB_TYPE:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          rgblight_enable_noeeprom();
+          rgblight_mode_noeeprom(1);
+          enableLEDTypeAnime = !enableLEDTypeAnime;
+        }
+      #endif
+      return false;
+    default:
+      break;
+  }
+  #ifdef RGBLIGHT_ENABLE
+    if(enableLEDTypeAnime) {
+      rgblight_mode_noeeprom(1);
+      uint16_t hue = (rgblight_config.hue + 5) % 360;
+      rgblight_sethsv_noeeprom(hue, rgblight_config.sat, rgblight_config.val);
+    }
+  #endif
+
+  return true;
+}
+
+void matrix_init_user(void) {
+}
--- a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk
+++ b/keyboards/dm9records/ergoinu/keymaps/default/rules.mk
@@ -0,0 +1,29 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = no       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# ergoinu configs
+DISABLE_PROMICRO_LEDs = yes
+
+# Uncomment these for debugging
+# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
+# $(info -- OPT_DEFS=$(OPT_DEFS))
+# $(info )
--- a/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h
+++ b/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h
@@ -0,0 +1,24 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2018 Takuya Urakawa <Twitter:@hsgw>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define RGBLIGHT_ANIMATIONS
--- a/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c
+++ b/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c
@@ -0,0 +1,101 @@
+#include QMK_KEYBOARD_H
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+#define JA_CLON KC_QUOT  // : and +
+#define JA_AT   KC_LBRC  // @ and `
+#define JA_HAT  KC_EQL   // ^ and ~
+#define JA_ENUN KC_RO    // \ and _ (EN mark and UNder score)
+#define JA_ENVL KC_JYEN  // \ and | (EN mark and Vertical Line)
+#define JA_LBRC KC_RBRC  // [ and {
+#define JA_RBRC KC_BSLS  // ] and }
+
+enum LAYER_NO {
+  BASE = 0,
+  META,
+  CONF
+};
+
+enum CUSTOM_KEYCODES {
+  RGB_RST = SAFE_RANGE,
+  RGB_TYPE,
+};
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+#define XXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [BASE] = LAYOUT( \
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, JA_HAT,   KC_JYEN, \
+    KC_DEL,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    JA_AT,    JA_LBRC, \
+    KC_LCTL,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, JA_CLON,  JA_RBRC, \
+    KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RO,    KC_RSFT, \
+                      MO(META),KC_LALT, KC_ZKHK, KC_BSPC, KC_SPC,  KC_ENT, KC_BSPC, KC_MHEN, KC_KANA, MO(META) \
+  ),
+
+
+  [META] = LAYOUT( \
+    MO(CONF),KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS, \
+    ______,  KC_CAPS, ______,  KC_UP,   ______,  ______,  ______,  ______,  ______,  ______,  KC_SLCK, KC_PSCR, KC_HOME, KC_END, \
+    ______,           KC_LEFT, KC_DOWN, KC_RGHT, ______,  ______,  ______,  ______,  ______,  KC_PAUS, KC_PGUP, KC_UP,   KC_PGDN, \
+    ______,           ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_LEFT, KC_DOWN, KC_RGHT, \
+                      ______,  ______,  KC_RGUI, KC_DEL,  KC_ENT,  ______,  KC_DEL,  KC_HENK, KC_LGUI, ______ \
+  ),
+ [CONF] = LAYOUT( \
+    ______,  RGB_TYPE,RGB_MOD,  RGB_VAI, RGB_HUI, RGB_HUI,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX, \
+    RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX, \
+    XXXXXX,           XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX, \
+    XXXXXX,           XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX, \
+                      XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,   XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX,  XXXXXX \
+  )
+};
+
+bool enableLEDTypeAnime = false;
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch(keycode) {
+    case RGB_RST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+        }
+      #endif
+      break;
+    case RGB_MOD:
+      #ifdef RGBLIGHT_ENABLE
+          if (record->event.pressed) {
+            enableLEDTypeAnime = false;
+            rgblight_step();
+          }
+      #endif
+      return false;
+    case RGB_TYPE:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          rgblight_enable_noeeprom();
+          rgblight_mode_noeeprom(1);
+          enableLEDTypeAnime = !enableLEDTypeAnime;
+        }
+      #endif
+      return false;
+    default:
+      break;
+  }
+  #ifdef RGBLIGHT_ENABLE
+    if(enableLEDTypeAnime) {
+      rgblight_mode_noeeprom(1);
+      uint16_t hue = (rgblight_config.hue + 5) % 360;
+      rgblight_sethsv_noeeprom(hue, rgblight_config.sat, rgblight_config.val);
+    }
+  #endif
+    return true;
+}
+
+void matrix_init_user(void) {
+}
--- a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk
+++ b/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk
@@ -0,0 +1,29 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
+SWAP_HANDS_ENABLE = no        # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# ergoinu configs
+DISABLE_PROMICRO_LEDs = yes
+
+# Uncomment these for debugging
+# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
+# $(info -- OPT_DEFS=$(OPT_DEFS))
+# $(info )
--- a/keyboards/dm9records/ergoinu/matrix.c
+++ b/keyboards/dm9records/ergoinu/matrix.c
@@ -0,0 +1,292 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "quantum.h"
+
+#include "serial.h"
+
+#ifndef DEBOUNCE
+#  define DEBOUNCE	5
+#endif
+
+#define ERROR_DISCONNECT_COUNT 5
+
+static uint8_t debouncing = DEBOUNCE;
+static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+static uint8_t error_count = 0;
+uint8_t is_master = 0 ;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+static uint8_t matrix_master_scan(void);
+
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+  matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+  matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+  return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+  return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+  debug_enable = true;
+  debug_matrix = true;
+  debug_mouse = true;
+  // initialize row and col
+  unselect_rows();
+  init_cols();
+
+  setPinOutput(B0);
+  setPinOutput(D5);
+
+  #ifdef DISABLE_PROMICRO_LEDs
+    writePinHigh(B0);
+    writePinHigh(D5);
+  #endif
+
+  // initialize matrix state: all keys off
+  for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+      matrix[i] = 0;
+      matrix_debouncing[i] = 0;
+  }
+
+  is_master = has_usb();
+
+  matrix_init_quantum();
+}
+
+uint8_t _matrix_scan(void) {
+  // Right hand is stored after the left in the matirx so, we need to offset it
+  int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+
+  for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+      select_row(i);
+      _delay_us(30);  // without this wait read unstable value.
+      matrix_row_t cols = read_cols();
+      if (matrix_debouncing[i+offset] != cols) {
+          matrix_debouncing[i+offset] = cols;
+          debouncing = DEBOUNCE;
+      }
+      unselect_rows();
+  }
+
+  if (debouncing) {
+      if (--debouncing) {
+          _delay_ms(1);
+      } else {
+          for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+              matrix[i+offset] = matrix_debouncing[i+offset];
+          }
+      }
+  }
+
+  return 1;
+}
+
+int serial_transaction(void) {
+  int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+  int ret=serial_update_buffers();
+  if (ret ) {
+#ifndef DISABLE_PROMICRO_LEDs
+      if(ret==2) writePinLow(B0);
+#endif
+      return 1;
+  }
+#ifndef DISABLE_PROMICRO_LEDs
+  writePinHigh(B0);
+#endif
+  for (int i = 0; i < ROWS_PER_HAND; ++i) {
+      matrix[slaveOffset+i] = serial_slave_buffer[i];
+  }
+  return 0;
+}
+
+uint8_t matrix_scan(void) {
+  if (is_master) {
+    matrix_master_scan();
+  }else{
+    matrix_slave_scan();
+
+    int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+      matrix[offset+i] = serial_master_buffer[i];
+    }
+
+    matrix_scan_quantum();
+  }
+  return 1;
+}
+
+
+uint8_t matrix_master_scan(void) {
+
+  int ret = _matrix_scan();
+
+  int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+  for (int i = 0; i < ROWS_PER_HAND; ++i) {
+    serial_master_buffer[i] = matrix[offset+i];
+  }
+
+  if( serial_transaction() ) {
+#ifndef DISABLE_PROMICRO_LEDs
+    // turn on the indicator led when halves are disconnected
+    writePinLow(D5);
+#endif
+
+    error_count++;
+
+    if (error_count > ERROR_DISCONNECT_COUNT) {
+        // reset other half if disconnected
+      int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+      for (int i = 0; i < ROWS_PER_HAND; ++i) {
+          matrix[slaveOffset+i] = 0;
+      }
+    }
+  } else {
+#ifndef DISABLE_PROMICRO_LEDs
+    // turn off the indicator led on no error
+    writePinHigh(D5);
+#endif
+    error_count = 0;
+  }
+  matrix_scan_quantum();
+  return ret;
+}
+
+void matrix_slave_scan(void) {
+  _matrix_scan();
+
+  int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+  for (int i = 0; i < ROWS_PER_HAND; ++i) {
+    serial_slave_buffer[i] = matrix[offset+i];
+  }
+}
+
+bool matrix_is_modified(void)
+{
+  if (debouncing) return false;
+  return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+  return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+  return matrix[row];
+}
+
+void matrix_print(void)
+{
+  print("\nr/c 0123456789ABCDEF\n");
+  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+    phex(row); print(": ");
+    pbin_reverse16(matrix_get_row(row));
+    print("\n");
+  }
+}
+
+uint8_t matrix_key_count(void)
+{
+  uint8_t count = 0;
+  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+    count += bitpop16(matrix[i]);
+  }
+  return count;
+}
+
+static void  init_cols(void)
+{
+  for(int x = 0; x < MATRIX_COLS; x++) {
+    _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
+    _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+  }
+}
+
+static matrix_row_t read_cols(void)
+{
+  matrix_row_t result = 0;
+  for(int x = 0; x < MATRIX_COLS; x++) {
+    result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
+  }
+  return result;
+}
+
+static void unselect_rows(void)
+{
+  for(int x = 0; x < ROWS_PER_HAND; x++) {
+    _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
+    _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+  }
+}
+
+static void select_row(uint8_t row)
+{
+  _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
+  _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+}
--- a/keyboards/dm9records/ergoinu/readme.md
+++ b/keyboards/dm9records/ergoinu/readme.md
@@ -0,0 +1,21 @@
+ErgoInu
+===
+
+![ergoinu](https://i.imgur.com/4CCM8Vl.jpg)
+
+An (Not Portable But Small) Ergonomic Split Keyboard.
+
+Keyboard Maintainer: [hsgw](https://github.com/hsgw/)   [twitter](https://twitter.com/hsgw)  
+Hardware Supported: Pro Micro  
+Hardware Availability & Repository: [https://github.com/hsgw/ergoinu](https://github.com/hsgw/ergoinu)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dm9records/ergoinu:default
+
+    (or)
+
+    make dm9records/ergoinu:default_jis
+
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
--- a/keyboards/dm9records/ergoinu/rules.mk
+++ b/keyboards/dm9records/ergoinu/rules.mk
@@ -0,0 +1,49 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = no       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.
+SUBPROJECT_rev1 = no
+USE_I2C = no               # i2c is not supported
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c serial.c split_util.c
+
+# ergoinu configs
+DISABLE_PROMICRO_LEDs = yes
+
+ifneq ($(strip $(ERGOINU)),)
+  ifeq ($(findstring promicroled, $(ERGOINU)), promicroled)
+    DISABLE_PROMICRO_LEDs = no
+  endif
+endif
+
+ifeq ($(strip $(DISABLE_PROMICRO_LEDs)), yes)
+  OPT_DEFS += -DDISABLE_PROMICRO_LEDs
+endif
--- a/keyboards/dm9records/ergoinu/serial.c
+++ b/keyboards/dm9records/ergoinu/serial.c
@@ -0,0 +1,295 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifdef USE_SERIAL
+
+#define _delay_sub_us(x)    __builtin_avr_delay_cycles(x)
+
+// Serial pulse period in microseconds.
+#define SELECT_SERIAL_SPEED 1
+#if SELECT_SERIAL_SPEED == 0
+  // Very High speed
+  #define SERIAL_DELAY 4             // micro sec
+  #define READ_WRITE_START_ADJUST 30 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+#elif SELECT_SERIAL_SPEED == 1
+  // High speed
+  #define SERIAL_DELAY 6             // micro sec
+  #define READ_WRITE_START_ADJUST 23 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+#elif SELECT_SERIAL_SPEED == 2
+  // Middle speed
+  #define SERIAL_DELAY 12            // micro sec
+  #define READ_WRITE_START_ADJUST 25 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+#elif SELECT_SERIAL_SPEED == 3
+  // Low speed
+  #define SERIAL_DELAY 24            // micro sec
+  #define READ_WRITE_START_ADJUST 25 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+#elif SELECT_SERIAL_SPEED == 4
+  // Very Low speed
+  #define SERIAL_DELAY 50            // micro sec
+  #define READ_WRITE_START_ADJUST 25 // cycles
+  #define READ_WRITE_WIDTH_ADJUST 10 // cycles
+#else
+#error Illegal Serial Speed
+#endif
+
+
+#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
+#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
+
+#define SLAVE_INT_WIDTH 1
+#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_delay_half1(void) {
+  _delay_us(SERIAL_DELAY_HALF1);
+}
+
+inline static
+void serial_delay_half2(void) {
+  _delay_us(SERIAL_DELAY_HALF2);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input_with_pullup(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input_with_pullup();
+
+#if SERIAL_PIN_MASK == _BV(PD0)
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+#elif SERIAL_PIN_MASK == _BV(PD2)
+  // Enable INT2
+  EIMSK |= _BV(INT2);
+  // Trigger on falling edge of INT2
+  EICRA &= ~(_BV(ISC20) | _BV(ISC21));
+#else
+ #error unknown SERIAL_PIN_MASK value
+#endif
+}
+
+// Used by the sender to synchronize timing with the reciver.
+static
+void sync_recv(void) {
+  for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
+  }
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+}
+
+// Used by the reciver to send a synchronization signal to the sender.
+static
+void sync_send(void) {
+  serial_low();
+  serial_delay();
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+  uint8_t byte = 0;
+  _delay_sub_us(READ_WRITE_START_ADJUST);
+  for ( uint8_t i = 0; i < 8; ++i) {
+    serial_delay_half1();   // read the middle of pulses
+    byte = (byte << 1) | serial_read_pin();
+    _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
+    serial_delay_half2();
+  }
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+  uint8_t b = 1<<7;
+  while( b ) {
+    if(data & b) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    b >>= 1;
+    serial_delay();
+  }
+  serial_low(); // sync_send() / senc_recv() need raise edge
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  serial_output();
+
+  // slave send phase
+  uint8_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    sync_send();
+    serial_write_byte(serial_slave_buffer[i]);
+    checksum += serial_slave_buffer[i];
+  }
+  sync_send();
+  serial_write_byte(checksum);
+
+  // slave switch to input
+  sync_send(); //0
+  serial_delay_half1(); //1
+  serial_low();         //2
+  serial_input_with_pullup(); //2
+  serial_delay_half1(); //3
+
+  // slave recive phase
+  uint8_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    sync_recv();
+    serial_master_buffer[i] = serial_read_byte();
+    checksum_computed += serial_master_buffer[i];
+  }
+  sync_recv();
+  uint8_t checksum_received = serial_read_byte();
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+
+  sync_recv(); //weit master output to high
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+// 2 => checksum error
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(SLAVE_INT_WIDTH);
+
+  // wait for the slaves response
+  serial_input_with_pullup();
+  _delay_us(SLAVE_INT_RESPONSE_TIME);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    serial_output();
+    serial_high();
+    sei();
+    return 1;
+  }
+
+  // master recive phase
+  // if the slave is present syncronize with it
+
+  uint8_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    sync_recv();
+    serial_slave_buffer[i] = serial_read_byte();
+    checksum_computed += serial_slave_buffer[i];
+  }
+  sync_recv();
+  uint8_t checksum_received = serial_read_byte();
+
+  if (checksum_computed != checksum_received) {
+    serial_output();
+    serial_high();
+    sei();
+    return 2;
+  }
+
+  // master switch to output
+  sync_recv(); //0
+  serial_delay();  //1
+  serial_low();    //3
+  serial_output(); // 3
+  serial_delay_half1(); //4
+
+  // master send phase
+  uint8_t checksum = 0;
+
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    sync_send();
+    serial_write_byte(serial_master_buffer[i]);
+    checksum += serial_master_buffer[i];
+  }
+  sync_send();
+  serial_write_byte(checksum);
+
+  // always, release the line when not in use
+  sync_send();
+
+  sei();
+  return 0;
+}
+
+#endif
--- a/keyboards/dm9records/ergoinu/serial.h
+++ b/keyboards/dm9records/ergoinu/serial.h
@@ -0,0 +1,24 @@
+#pragma once
+
+#include <stdbool.h>
+
+// ////////////////////////////////////////////
+// Need Soft Serial defines in serial_config.h
+// ////////////////////////////////////////////
+// ex.
+//  #define SERIAL_PIN_DDR DDRD
+//  #define SERIAL_PIN_PORT PORTD
+//  #define SERIAL_PIN_INPUT PIND
+//  #define SERIAL_PIN_MASK _BV(PD?)   ?=0,2
+//  #define SERIAL_PIN_INTERRUPT INT?_vect  ?=0,2
+//  #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+//  #define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
--- a/keyboards/dm9records/ergoinu/serial_config.h
+++ b/keyboards/dm9records/ergoinu/serial_config.h
@@ -0,0 +1,11 @@
+#pragma once
+
+/* Soft Serial defines */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD2)
+#define SERIAL_PIN_INTERRUPT INT2_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
--- a/keyboards/dm9records/ergoinu/split_util.c
+++ b/keyboards/dm9records/ergoinu/split_util.c
@@ -0,0 +1,56 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+
+#include "serial.h"
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+  serial_master_init();
+}
+
+static void keyboard_slave_setup(void) {
+  serial_slave_init();
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+}
--- a/keyboards/dm9records/ergoinu/split_util.h
+++ b/keyboards/dm9records/ergoinu/split_util.h
@@ -0,0 +1,12 @@
+#pragma once
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
--- a/keyboards/dm9records/plaid/config.h
+++ b/keyboards/dm9records/plaid/config.h
@@ -0,0 +1,248 @@
+/*
+Copyright 2019 Takuya Urakawa (dm9records.com)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+/* VID & PID from vusb project, see tmk_core/protocol/vusb/USB-IDs-for-free.txt"*/
+#define VENDOR_ID 0x16c0
+#define PRODUCT_ID 0x27db
+#define DEVICE_VER 0x0002
+#define MANUFACTURER dm9records
+#define PRODUCT Plaid
+#define DESCRIPTION 12x4 ortholinear keyboard with through hole components
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B4, B5, B3, D4 }
+#define MATRIX_COL_PINS { B0, D7, D6, D5, B2, B1, C0, C1, C2, C3, D1, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define USB_MAX_POWER_CONSUMPTION 100
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
--- a/keyboards/dm9records/plaid/info.json
+++ b/keyboards/dm9records/plaid/info.json
@@ -0,0 +1,113 @@
+{
+  "keyboard_name": "Plaid // Through Hole",
+  "keyboard_folder": "dm9records/plaid",
+  "url": "https://github.com/hsgw/plaid",
+  "maintainer": "hsgw(Takuya Urakawa)",
+  "width": 12,
+  "height": 4,
+  "layouts": {
+    "LAYOUT_plaid_mit": {
+      "key_count": 47,
+      "layout": [
+        { "w": 1, "x": 0, "y": 0 },
+        { "w": 1, "x": 1, "y": 0 },
+        { "w": 1, "x": 2, "y": 0 },
+        { "w": 1, "x": 3, "y": 0 },
+        { "w": 1, "x": 4, "y": 0 },
+        { "w": 1, "x": 5, "y": 0 },
+        { "w": 1, "x": 6, "y": 0 },
+        { "w": 1, "x": 7, "y": 0 },
+        { "w": 1, "x": 8, "y": 0 },
+        { "w": 1, "x": 9, "y": 0 },
+        { "w": 1, "x": 10, "y": 0 },
+        { "w": 1, "x": 11, "y": 0 },
+        { "w": 1, "x": 0, "y": 1 },
+        { "w": 1, "x": 1, "y": 1 },
+        { "w": 1, "x": 2, "y": 1 },
+        { "w": 1, "x": 3, "y": 1 },
+        { "w": 1, "x": 4, "y": 1 },
+        { "w": 1, "x": 5, "y": 1 },
+        { "w": 1, "x": 6, "y": 1 },
+        { "w": 1, "x": 7, "y": 1 },
+        { "w": 1, "x": 8, "y": 1 },
+        { "w": 1, "x": 9, "y": 1 },
+        { "w": 1, "x": 10, "y": 1 },
+        { "w": 1, "x": 11, "y": 1 },
+        { "w": 1, "x": 0, "y": 2 },
+        { "w": 1, "x": 1, "y": 2 },
+        { "w": 1, "x": 2, "y": 2 },
+        { "w": 1, "x": 3, "y": 2 },
+        { "w": 1, "x": 4, "y": 2 },
+        { "w": 1, "x": 5, "y": 2 },
+        { "w": 1, "x": 6, "y": 2 },
+        { "w": 1, "x": 7, "y": 2 },
+        { "w": 1, "x": 8, "y": 2 },
+        { "w": 1, "x": 9, "y": 2 },
+        { "w": 1, "x": 10, "y": 2 },
+        { "w": 1, "x": 11, "y": 2 },
+        { "w": 1, "x": 0, "y": 3 },
+        { "w": 1, "x": 1, "y": 3 },
+        { "w": 1, "x": 2, "y": 3 },
+        { "w": 1, "x": 3, "y": 3 },
+        { "w": 1, "x": 4, "y": 3 },
+        { "w": 2, "x": 5, "y": 3 },
+        { "w": 1, "x": 7, "y": 3 },
+        { "w": 1, "x": 8, "y": 3 },
+        { "w": 1, "x": 9, "y": 3 },
+        { "w": 1, "x": 10, "y": 3 },
+        { "w": 1, "x": 11, "y": 3 } ]
+    },
+    "LAYOUT_plaid_grid": {
+      "key_count": 48,
+      "layout": [
+        { "w": 1, "x": 0, "y": 0 },
+        { "w": 1, "x": 1, "y": 0 },
+        { "w": 1, "x": 2, "y": 0 },
+        { "w": 1, "x": 3, "y": 0 },
+        { "w": 1, "x": 4, "y": 0 },
+        { "w": 1, "x": 5, "y": 0 },
+        { "w": 1, "x": 6, "y": 0 },
+        { "w": 1, "x": 7, "y": 0 },
+        { "w": 1, "x": 8, "y": 0 },
+        { "w": 1, "x": 9, "y": 0 },
+        { "w": 1, "x": 10, "y": 0 },
+        { "w": 1, "x": 11, "y": 0 },
+        { "w": 1, "x": 0, "y": 1 },
+        { "w": 1, "x": 1, "y": 1 },
+        { "w": 1, "x": 2, "y": 1 },
+        { "w": 1, "x": 3, "y": 1 },
+        { "w": 1, "x": 4, "y": 1 },
+        { "w": 1, "x": 5, "y": 1 },
+        { "w": 1, "x": 6, "y": 1 },
+        { "w": 1, "x": 7, "y": 1 },
+        { "w": 1, "x": 8, "y": 1 },
+        { "w": 1, "x": 9, "y": 1 },
+        { "w": 1, "x": 10, "y": 1 },
+        { "w": 1, "x": 11, "y": 1 },
+        { "w": 1, "x": 0, "y": 2 },
+        { "w": 1, "x": 1, "y": 2 },
+        { "w": 1, "x": 2, "y": 2 },
+        { "w": 1, "x": 3, "y": 2 },
+        { "w": 1, "x": 4, "y": 2 },
+        { "w": 1, "x": 5, "y": 2 },
+        { "w": 1, "x": 6, "y": 2 },
+        { "w": 1, "x": 7, "y": 2 },
+        { "w": 1, "x": 8, "y": 2 },
+        { "w": 1, "x": 9, "y": 2 },
+        { "w": 1, "x": 10, "y": 2 },
+        { "w": 1, "x": 11, "y": 2 },
+        { "w": 1, "x": 0, "y": 3 },
+        { "w": 1, "x": 1, "y": 3 },
+        { "w": 1, "x": 2, "y": 3 },
+        { "w": 1, "x": 3, "y": 3 },
+        { "w": 1, "x": 4, "y": 3 },
+        { "w": 1, "x": 5, "y": 3 },
+        { "w": 1, "x": 6, "y": 3 },
+        { "w": 1, "x": 7, "y": 3 },
+        { "w": 1, "x": 8, "y": 3 },
+        { "w": 1, "x": 9, "y": 3 },
+        { "w": 1, "x": 10, "y": 3 },
+        { "w": 1, "x": 11, "y": 3 } ]
+    }
+  }
+}
--- a/keyboards/dm9records/plaid/keymaps/brickbots/config.h
+++ b/keyboards/dm9records/plaid/keymaps/brickbots/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2019 Takuya Urakawa (dm9records.com)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- a/keyboards/dm9records/plaid/keymaps/brickbots/keymap.c
+++ b/keyboards/dm9records/plaid/keymaps/brickbots/keymap.c
@@ -0,0 +1,411 @@
+/* Copyright 2019 Takuya Urakawa (dm9records.com)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+enum plaid_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST
+};
+
+enum plaid_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  EXT_PLV,
+  LED_1,
+  LED_2,
+  LED_3,
+  LED_4,
+  LED_5,
+  LED_6,
+  LED_7,
+  LED_8,
+  LED_9,
+  LED_0
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+// array of keys considered modifiers for led purposes
+const uint16_t modifiers[] = {
+    KC_LCTL,
+    KC_RCTL,
+    KC_LALT,
+    KC_RALT,
+    KC_LSFT,
+    KC_RSFT,
+    KC_LGUI,
+    KC_RGUI,
+    LOWER,
+    RAISE
+};
+
+//Setup consts for LED modes
+#define LEDMODE_ON 1 //always on
+#define LEDMODE_OFF 0 //always off
+#define LEDMODE_MODS 2 //On with modifiers
+#define LEDMODE_BLINKIN 3 //blinkinlights - % chance toggle on keypress
+#define LEDMODE_KEY 4 //On with any keypress, off with key release
+#define LEDMODE_ENTER 5 // On with enter key
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ltrl | Rctl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_plaid_grid(
+    KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    KC_LCTL, KC_RCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | RAlt | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT_plaid_grid(
+    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+    KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    KC_LCTL, KC_RALT, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | RAlt | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT_plaid_grid(
+    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT ,
+    KC_LCTL, KC_RALT, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_plaid_grid(
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+    _______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_plaid_grid(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_PLOVER] = LAYOUT_plaid_grid(
+    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   ,
+    XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
+    XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |Reset |      |      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_plaid_grid(
+    RESET,LED_1, LED_2, LED_3, LED_4, LED_5,LED_6, LED_7, LED_8, LED_9, LED_0,KC_DEL ,
+    _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______,
+    _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  TERM_ON, TERM_OFF, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
+
+
+};
+
+//Setup config struct for LED
+typedef union {
+  uint32_t raw;
+  struct {
+    uint8_t  red_mode :8;
+    uint8_t  green_mode :8;
+  };
+} led_config_t;
+led_config_t led_config;
+
+//Set leds to saved state during powerup
+void keyboard_post_init_user(void) {
+  // Call the post init code.
+  led_config.raw = eeconfig_read_user();
+
+  if(led_config.red_mode == LEDMODE_ON) {
+      writePinHigh(LED_RED);
+  }
+
+  if(led_config.green_mode == LEDMODE_ON) {
+      writePinHigh(LED_GREEN);
+  }
+}
+
+void eeconfig_init_user(void) {  // EEPROM is getting reset! 
+  led_config.raw = 0;
+  led_config.red_mode = LEDMODE_ON;
+  led_config.green_mode = LEDMODE_MODS;
+      eeconfig_update_user(led_config.raw);
+  eeconfig_update_user(led_config.raw);
+}
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+void led_keypress_update(uint8_t led, uint8_t led_mode, uint16_t keycode, keyrecord_t *record) {
+    switch (led_mode) {
+      case LEDMODE_MODS:
+        for (int i=0;i<sizeof(modifiers) / sizeof(modifiers[0]);i++) {
+          if(keycode==modifiers[i]) {
+            if (record->event.pressed) {
+              writePinHigh(led);
+            }
+            else {
+              writePinLow(led);
+            }
+          }
+        }
+        break;
+      case LEDMODE_BLINKIN:
+        if (record->event.pressed) {
+          if(rand() % 2 == 1) {
+            if(rand() % 2 == 0) {
+              writePinLow(led);
+            }
+            else {
+              writePinHigh(led);
+            }
+          }
+        }
+        break;
+      case LEDMODE_KEY:
+        if (record->event.pressed) {
+          writePinHigh(led);
+          return;
+        }
+        else {
+          writePinLow(led);
+          return;
+        }
+        break;
+      case LEDMODE_ENTER:
+        if (keycode==KC_ENT) {
+          writePinHigh(led);
+        }
+        else {
+          writePinLow(led);
+        }
+        break;
+
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  /* If the either led mode is keypressed based, call the led updater
+     then let it fall through the keypress handlers. Just to keep 
+     the logic out of this procedure */
+  if (led_config.red_mode >= LEDMODE_MODS && led_config.red_mode <= LEDMODE_ENTER) {
+      led_keypress_update(LED_RED, led_config.red_mode, keycode, record);
+  }
+  if (led_config.green_mode >= LEDMODE_MODS && led_config.green_mode <= LEDMODE_ENTER) {
+      led_keypress_update(LED_GREEN, led_config.green_mode, keycode, record);
+  }
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+    case LED_1:
+      if (record->event.pressed) {
+        if (led_config.red_mode==LEDMODE_ON) {
+            led_config.red_mode=LEDMODE_OFF;
+            writePinLow(LED_RED);
+        }
+        else {
+            led_config.red_mode=LEDMODE_ON;
+            writePinHigh(LED_RED);
+        }
+      }
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_2:
+      if (record->event.pressed) {
+        if (led_config.green_mode==LEDMODE_ON) {
+            led_config.green_mode=LEDMODE_OFF;
+            writePinLow(LED_GREEN);
+        }
+        else {
+            led_config.green_mode=LEDMODE_ON;
+            writePinHigh(LED_GREEN);
+        }
+      }
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_3:
+      led_config.red_mode=LEDMODE_MODS;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_4:
+      led_config.green_mode=LEDMODE_MODS;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_5:
+      led_config.red_mode=LEDMODE_BLINKIN;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_6:
+      led_config.green_mode=LEDMODE_BLINKIN;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_7:
+      led_config.red_mode=LEDMODE_KEY;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_8:
+      led_config.green_mode=LEDMODE_KEY;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_9:
+      led_config.red_mode=LEDMODE_ENTER;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_0:
+      led_config.green_mode=LEDMODE_ENTER;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+  }
+  return true;
+}
--- a/keyboards/dm9records/plaid/keymaps/brickbots/readme.md
+++ b/keyboards/dm9records/plaid/keymaps/brickbots/readme.md
@@ -0,0 +1,36 @@
+# Brickbots keymap for plaid
+Original copyright 2019 Takuya Urakawa (dm9records.com)
+LED Support added by Richard Sutherland (rich@brickbots.com)
+
+This layout is based on the Planck layout, with esc/tab swapped and an extra
+ctrl key in the bottom left corner. It includes an adjust layer (6)
+accessible by holding the lower and raise modifiers (MO3 and MO4) together.
+The adjustment layer is used to set the behavior of the two LEDs:
+
+**Modifier Mode:**   
+Activates when any modifier (shift, alt, os, MO) key is held
+down.  LED turns off when key is release
+
+**Blinkinlights Mode:**  
+Random chance of state change on each keystroke.
+
+**Keypress Mode:**  
+On for any keypress as long as the key is pressed
+
+**Carriage Mode:**  
+Turns on when enter is pressed, turns off when any next key is pressed
+
+To set the behavior of an LED, and save it to eeprom, hold the
+raise/lower keys together to access the adjust layer, then use
+the keys indicated below to set the behaviors
+
+* q = Toggle Red LED state, deactivates any other modes
+* w = Toggle Green LED state, deactivates any other modes
+* e = Set RED LED to modifier mode
+* r = Set GREEN LED to modifier mode
+* t = Set RED LED to Blinkinlights mode
+* y = set GREEN LED to Blinkinlights mode
+* u = set RED LED to Keypress mode
+* i = set GREEN LED to Keypress mode
+* o = set RED LED to Carriage mode
+* p = set GREEN LED to Carriage mode
--- a/keyboards/dm9records/plaid/keymaps/default/config.h
+++ b/keyboards/dm9records/plaid/keymaps/default/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2019 Takuya Urakawa (dm9records.com)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- a/keyboards/dm9records/plaid/keymaps/default/keymap.c
+++ b/keyboards/dm9records/plaid/keymaps/default/keymap.c
@@ -0,0 +1,410 @@
+/* Copyright 2019 Takuya Urakawa (dm9records.com)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+
+enum plaid_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST
+};
+
+enum plaid_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  EXT_PLV,
+  LED_1,
+  LED_2,
+  LED_3,
+  LED_4,
+  LED_5,
+  LED_6,
+  LED_7,
+  LED_8,
+  LED_9,
+  LED_0
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+// array of keys considered modifiers for led purposes
+const uint16_t modifiers[] = {
+    KC_LCTL,
+    KC_RCTL,
+    KC_LALT,
+    KC_RALT,
+    KC_LSFT,
+    KC_RSFT,
+    KC_LGUI,
+    KC_RGUI,
+    LOWER,
+    RAISE
+};
+
+//Setup consts for LED modes
+#define LEDMODE_ON 1 //always on
+#define LEDMODE_OFF 0 //always off
+#define LEDMODE_MODS 2 //On with modifiers
+#define LEDMODE_BLINKIN 3 //blinkinlights - % chance toggle on keypress
+#define LEDMODE_KEY 4 //On with any keypress, off with key release
+#define LEDMODE_ENTER 5 // On with enter key
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | RAlt | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_plaid_grid(
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    KC_LCTL, KC_RALT, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | RAlt | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT_plaid_grid(
+    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+    KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    KC_LCTL, KC_RALT, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | RAlt | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT_plaid_grid(
+    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT ,
+    KC_LCTL, KC_RALT, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_plaid_grid(
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+    _______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_plaid_grid(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_PLOVER] = LAYOUT_plaid_grid(
+    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   ,
+    XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
+    XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |Reset |      |      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_plaid_grid(
+    RESET,LED_1, LED_2, LED_3, LED_4, LED_5,LED_6, LED_7, LED_8, LED_9, LED_0,KC_DEL ,
+    _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______,
+    _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  TERM_ON, TERM_OFF, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
+
+
+};
+
+//Setup config struct for LED
+typedef union {
+  uint32_t raw;
+  struct {
+    uint8_t  red_mode :8;
+    uint8_t  green_mode :8;
+  };
+} led_config_t;
+led_config_t led_config;
+
+//Set leds to saved state during powerup
+void keyboard_post_init_user(void) {
+  // Call the post init code.
+  led_config.raw = eeconfig_read_user();
+
+  if(led_config.red_mode == LEDMODE_ON) {
+      writePinHigh(LED_RED);
+  }
+
+  if(led_config.green_mode == LEDMODE_ON) {
+      writePinHigh(LED_GREEN);
+  }
+}
+
+void eeconfig_init_user(void) {  // EEPROM is getting reset! 
+  led_config.raw = 0;
+  led_config.red_mode = LEDMODE_ON;
+  led_config.green_mode = LEDMODE_MODS;
+      eeconfig_update_user(led_config.raw);
+  eeconfig_update_user(led_config.raw);
+}
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+void led_keypress_update(uint8_t led, uint8_t led_mode, uint16_t keycode, keyrecord_t *record) {
+    switch (led_mode) {
+      case LEDMODE_MODS:
+        for (int i=0;i<sizeof(modifiers) / sizeof(modifiers[0]);i++) {
+          if(keycode==modifiers[i]) {
+            if (record->event.pressed) {
+              writePinHigh(led);
+            }
+            else {
+              writePinLow(led);
+            }
+          }
+        }
+        break;
+      case LEDMODE_BLINKIN:
+        if (record->event.pressed) {
+          if(rand() % 2 == 1) {
+            if(rand() % 2 == 0) {
+              writePinLow(led);
+            }
+            else {
+              writePinHigh(led);
+            }
+          }
+        }
+        break;
+      case LEDMODE_KEY:
+        if (record->event.pressed) {
+          writePinHigh(led);
+          return;
+        }
+        else {
+          writePinLow(led);
+          return;
+        }
+        break;
+      case LEDMODE_ENTER:
+        if (keycode==KC_ENT) {
+          writePinHigh(led);
+        }
+        else {
+          writePinLow(led);
+        }
+        break;
+
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  /* If the either led mode is keypressed based, call the led updater
+     then let it fall through the keypress handlers. Just to keep 
+     the logic out of this procedure */
+  if (led_config.red_mode >= LEDMODE_MODS && led_config.red_mode <= LEDMODE_ENTER) {
+      led_keypress_update(LED_RED, led_config.red_mode, keycode, record);
+  }
+  if (led_config.green_mode >= LEDMODE_MODS && led_config.green_mode <= LEDMODE_ENTER) {
+      led_keypress_update(LED_GREEN, led_config.green_mode, keycode, record);
+  }
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+    case LED_1:
+      if (record->event.pressed) {
+        if (led_config.red_mode==LEDMODE_ON) {
+            led_config.red_mode=LEDMODE_OFF;
+            writePinLow(LED_RED);
+        }
+        else {
+            led_config.red_mode=LEDMODE_ON;
+            writePinHigh(LED_RED);
+        }
+      }
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_2:
+      if (record->event.pressed) {
+        if (led_config.green_mode==LEDMODE_ON) {
+            led_config.green_mode=LEDMODE_OFF;
+            writePinLow(LED_GREEN);
+        }
+        else {
+            led_config.green_mode=LEDMODE_ON;
+            writePinHigh(LED_GREEN);
+        }
+      }
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_3:
+      led_config.red_mode=LEDMODE_MODS;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_4:
+      led_config.green_mode=LEDMODE_MODS;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_5:
+      led_config.red_mode=LEDMODE_BLINKIN;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_6:
+      led_config.green_mode=LEDMODE_BLINKIN;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_7:
+      led_config.red_mode=LEDMODE_KEY;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_8:
+      led_config.green_mode=LEDMODE_KEY;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_9:
+      led_config.red_mode=LEDMODE_ENTER;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+    case LED_0:
+      led_config.green_mode=LEDMODE_ENTER;
+      eeconfig_update_user(led_config.raw);
+      return false;
+      break;
+  }
+  return true;
+}
--- a/keyboards/dm9records/plaid/keymaps/default/readme.md
+++ b/keyboards/dm9records/plaid/keymaps/default/readme.md
@@ -0,0 +1,35 @@
+# The default keymap for plaid
+Original copyright 2019 Takuya Urakawa (dm9records.com)
+LED Support added  by Richard Sutherland (rich@brickbots.com)
+
+This layout is based on the Planck layout, and includes an adjust layer (6)
+accessible by holding the lower and raise modifiers (MO3 and MO4) together.
+The adjustment layer is used to set the behavior of the two LEDs:
+
+**Modifier Mode:**   
+Activates when any modifier (shift, alt, os, MO) key is held
+down.  LED turns off when key is release
+
+**Blinkinlights Mode:**  
+Random chance of state change on each keystroke.
+
+**Keypress Mode:**  
+On for any keypress as long as the key is pressed
+
+**Carriage Mode:**  
+Turns on when enter is pressed, turns off when any next key is pressed
+
+To set the behavior of an LED, and save it to eeprom, hold the
+raise/lower keys together to access the adjust layer, then use
+the keys indicated below to set the behaviors
+
+* q = Toggle Red LED state, deactivates any other modes
+* w = Toggle Green LED state, deactivates any other modes
+* e = Set RED LED to modifier mode
+* r = Set GREEN LED to modifier mode
+* t = Set RED LED to Blinkinlights mode
+* y = set GREEN LED to Blinkinlights mode
+* u = set RED LED to Keypress mode
+* i = set GREEN LED to Keypress mode
+* o = set RED LED to Carriage mode
+* p = set GREEN LED to Carriage mode
--- a/keyboards/dm9records/plaid/keymaps/thehalfdeafchef/config.h
+++ b/keyboards/dm9records/plaid/keymaps/thehalfdeafchef/config.h
@@ -0,0 +1,19 @@
+/* Copyright 2019 Ian Canino (ian@thecommittedbug.io)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- a/keyboards/dm9records/plaid/keymaps/thehalfdeafchef/keymap.c
+++ b/keyboards/dm9records/plaid/keymaps/thehalfdeafchef/keymap.c
@@ -0,0 +1,182 @@
+#include QMK_KEYBOARD_H
+
+enum plaid_layers {
+    _QWERTY,
+    _DVORAK,
+    _COLEMAK,
+    _LOWER,
+    _RAISE,
+    _FUNCTION,
+};
+
+enum plaid_keycodes { QWERTY = SAFE_RANGE, COLEMAK, DVORAK, LED };
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+#define LED_ON 1
+#define LED_OFF 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Qwerty
+     * ,-----------------------------------------------------------------------------------.
+     * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * | LS/( |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | Ctrl | LGUI | Alt  |   [  |Lower |    Space    |Raise |   ]  | RGUI |   \  | RS/) |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_QWERTY] = LAYOUT_planck_mit(KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, KC_LCTL, KC_LGUI, KC_LALT, KC_LBRC, LOWER, KC_SPC, RAISE, KC_RBRC, KC_RGUI, KC_BSLS, KC_RSPC),
+
+    /* Colemak
+     * ,-----------------------------------------------------------------------------------.
+     * | Esc  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | Tab  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * | LS/( |   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | Ctrl | LGUI | Alt  |   [  |Lower |    Space    |Raise |   ]  | RGUI |   \  | RS/) |
+     * `-----------------------------------------------------------------------------------'
+     */
+
+    [_COLEMAK] = LAYOUT_planck_mit(KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, KC_TAB, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, KC_LCTL, KC_RALT, KC_LALT, KC_LGUI, LOWER, KC_SPC, RAISE, KC_RBRC, KC_RGUI, KC_BSLS, KC_RSPC),
+
+    /* Dvorak
+     * ,-----------------------------------------------------------------------------------.
+     * | Esc  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | Tab  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | Ctrl | LGUI | Alt  |   [  |Lower |    Space    |Raise |   ]  | RGUI |   \  | RS/) |
+     * `-----------------------------------------------------------------------------------'
+     */
+
+    [_DVORAK] = LAYOUT_planck_mit(KC_ESC, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, KC_TAB, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, KC_LSPO, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT, KC_LCTL, KC_RALT, KC_LALT, KC_LGUI, LOWER, KC_SPC, RAISE, KC_RBRC, KC_RGUI, KC_BSLS, KC_RSPC),
+
+    /* LOWER
+     * ,----------------------------------------------------------------------------.
+     * |      |      | MPRV | MPLY | MNXT |     |     |     | PGUP| UP  | PGDN|PSCR |
+     * |------+------+------+------+------+-----+-----+-----+-----+-----------+-----+
+     * |      |      | MUTE | VOLD | VOLU |     |     |     | LEFT| DOWN|RIGHT|     |
+     * |------+------+------+------+------+-----+-----+-----+-----+-----+-----+-----+
+     * |      |      | MAIL | WBAK | WFWD |     |     |     | HOME|     | END |     |
+     * |------+------+------+------+------+-----+-----+-----+-----+-----------+-----+
+     * |      |      |      |      |      |    DEL    |     |     |     |     |     |
+     * `----------------------------------------------------------------------------'
+     */
+
+    [_LOWER] = LAYOUT_planck_mit(KC_NO, KC_NO, KC_MPRV, KC_MPLY, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_NO, KC_NO, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_MAIL, KC_WBAK, KC_WFWD, KC_NO, KC_NO, KC_NO, KC_HOME, KC_NO, KC_END, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DEL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO),
+
+    /* RAISE
+     * ,--------------------------------------------------------------------------------.
+     * | NLCK |  1   |  2   |  3   |  -   |     |     |     |  !   |  #   |  $   |  +   |
+     * |------+------+------+------+------+-----+-----+-----+------+------+------+------+
+     * |   /  |  4   |  5   |  6   |  +   |     |     |     |  %   |  !   |  !   |  =   |
+     * |------+------+------+------+------+-----+-----+-----+------+------+------+------+
+     * |   *  |  7   |  8   |  9   |  ,   |     |     |     |  _   |  -   |  @   |  ~   |
+     * |------+------+------+------+------+-----+-----+-----+------+------+------+------+
+     * |      |  0   |  .   | Ent  |  =   |           |     |      |      |      |  `   |
+     * `--------------------------------------------------------------------------------'
+     */
+
+    [_RAISE] = LAYOUT_planck_mit(KC_NLCK, KC_P1, KC_P2, KC_P3, KC_PMNS, KC_NO, KC_NO, KC_NO, KC_EXLM, KC_HASH, KC_DLR, KC_PLUS, KC_PSLS, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_NO, KC_NO, KC_NO, KC_PERC, KC_ASTR, KC_AMPR, KC_EQL, KC_PAST, KC_P7, KC_P8, KC_P9, KC_PCMM, KC_NO, KC_NO, KC_NO, KC_UNDS, KC_MINS, KC_AT, KC_TILDE, KC_NO, KC_P0, KC_PDOT, KC_PENT, KC_PEQL, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_GRV),
+
+    /* Function (Lower + Raise)
+     * ,-----------------------------------------------------------------------------------------------------------------------.
+     * | RESET| LCA_T(F1)  | LCA_T(F2) | LCA_T(F3) | LCA_T(F4) | LCA_T(F5) | LCA_T(F6) | LCA_T(F7) |      |      |      |      |
+     * |------+------------+-----------+-----------+-----------+-----------+-----------+-----------+------+------+------+------+
+     * |      |            |           |           |           | QWERTY    | DVORAK    | COLEMAK   |      |      |      |      |
+     * |------+------------+-----------+-----------+-----------+-----------+-----------+-----------+------+------+------+------+
+     * |      |            |           |           |           |           |           |           |      |      |      |      |
+     * |------+------------+-----------+-----------+-----------+-----------+-----------+-----------+------+------+------+------+
+     * |      |            |           |           |           |          LED          |           |      |      |      |      |
+     * `-----------------------------------------------------------------------------------------------------------------------'
+     */
+
+    [_FUNCTION] = LAYOUT_planck_mit(RESET, LCA_T(KC_F1), LCA_T(KC_F2), LCA_T(KC_F3), LCA_T(KC_F4), LCA_T(KC_F5), LCA_T(KC_F6), LCA_T(KC_F7), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, QWERTY, DVORAK, COLEMAK, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, LED, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO)};
+
+// constants to toggle LED behavior
+
+// Setup config struct for LED
+typedef union {
+    uint32_t raw;
+    struct {
+        bool red_mode : 1;
+        bool green_mode : 1;
+    };
+} led_config_t;
+led_config_t led_config;
+
+void keyboard_post_init_user(void) { led_config.raw = eeconfig_read_user(); }
+
+void eeconfig_init_user(void) {  // EEPROM is getting reset!
+    led_config.raw        = 0;
+    led_config.red_mode   = LED_ON;
+    led_config.green_mode = LED_ON;
+    eeconfig_update_user(led_config.raw);
+    eeconfig_update_user(led_config.raw);
+}
+
+// When LOWER and RAISE are held together, go to the FUNCTION layer
+uint32_t layer_state_set_user(uint32_t state) { return update_tri_layer_state(state, _LOWER, _RAISE, _FUNCTION); }
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+    uint8_t layer = biton32(layer_state);
+
+    switch (layer) {
+        case _LOWER:
+            writePinHigh(LED_RED);
+            break;
+        case _RAISE:
+            writePinHigh(LED_GREEN);
+            break;
+        default:
+            writePinLow(LED_GREEN);
+            writePinLow(LED_RED);
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case QWERTY:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_QWERTY);
+            }
+            return false;
+            break;
+        case COLEMAK:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_COLEMAK);
+            }
+            return false;
+            break;
+        case DVORAK:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_DVORAK);
+            }
+            return false;
+            break;
+        case LED:
+            if (record->event.pressed) {
+                if (led_config.red_mode == LED_ON && led_config.green_mode == LED_ON) {
+                    led_config.red_mode   = LED_OFF;
+                    led_config.green_mode = LED_OFF;
+                } else if (led_config.red_mode == LED_OFF && led_config.green_mode == LED_OFF) {
+                    led_config.red_mode   = LED_ON;
+                    led_config.green_mode = LED_ON;
+                }
+            }
+            eeconfig_update_user(led_config.raw);
+            return false;
+            break;
+    }
+    return true;
+}
--- a/keyboards/dm9records/plaid/keymaps/thehalfdeafchef/readme.md
+++ b/keyboards/dm9records/plaid/keymaps/thehalfdeafchef/readme.md
@@ -0,0 +1,5 @@
+![Plaid Layout Image](https://i.imgur.com/WnVnwEG.png)
+
+# The Half Deaf Chef Plaid Layout
+
+Opinionated keymaps optimized for programmers. The Left and Right Shift tap as parenthesis and the bracket keys are to either side of the layer keys (LOWER, RAISE). A 'right-side' up number pad in a layer with a complementary 'symbol' pad on the opposite side. An additional layer is provided to switch to virtual console on Linux based systems running xorg. These changes are propagated among all the layouts.
--- a/keyboards/dm9records/plaid/plaid.c
+++ b/keyboards/dm9records/plaid/plaid.c
@@ -0,0 +1,43 @@
+/* Copyright 2019 Takuya Urakawa (dm9records.com)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "plaid.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
--- a/keyboards/dm9records/plaid/plaid.h
+++ b/keyboards/dm9records/plaid/plaid.h
@@ -0,0 +1,68 @@
+/* Copyright 2019 Takuya Urakawa (dm9records.com)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_plaid_mit( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	k30, k31, k32, k33, k34,    k35,   k37, k38, k39, k3a, k3b \
+) \
+{ \
+	{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+	{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+	{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+	{ k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \
+}
+
+#define LAYOUT_plaid_grid( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
+) \
+{ \
+	{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+	{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+	{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+	{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
+}
+
+// Used to create a keymap using only KC_ prefixed keys
+#define KC_KEYMAP( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
+	) \
+	LAYOUT_plaid_grid( \
+		KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, \
+		KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, \
+		KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, \
+		KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b \
+    )
+
+#define KEYMAP LAYOUT_plaid_grid
+#define LAYOUT_ortho_4x12 LAYOUT_plaid_grid
+#define LAYOUT_planck_mit LAYOUT_plaid_mit
+#define LAYOUT_kc_ortho_4x12 KC_KEYMAP
+#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
+
+#define LED_RED C5
+#define LED_GREEN C4
--- a/keyboards/dm9records/plaid/readme.md
+++ b/keyboards/dm9records/plaid/readme.md
@@ -0,0 +1,23 @@
+# plaid // Through Hole
+
+![plaid](https://i.imgur.com/tTi9yR9h.jpg)
+
+12x4 ortholinear keyboard with only through hole components.   
+
+Keyboard Maintainer: [hsgw](https://github.com/hsgw)  
+Hardware Supported: ATMEGA328p with vusb [PCB](https://github.com/hsgw/plaid)  
+Hardware Availability: Group buy in r/mk
+
+Make example for this keyboard (after setting up your build environment):
+    make dm9records/plaid:default
+
+Flashing example for this keyboard:
+
+    make dm9records/plaid:default:flash
+
+## Bootloader
+use usbasploader in my repository.
+https://github.com/hsgw/USBaspLoader/tree/plaid
+
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/dm9records/plaid/rules.mk
+++ b/keyboards/dm9records/plaid/rules.mk
@@ -0,0 +1,36 @@
+# MCU name
+MCU = atmega328p
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = USBasp
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
+
+LAYOUTS = ortho_4x12 planck_mit
+LAYOUTS_HAS_RGB = no
--- a/keyboards/dm9records/tartan/config.h
+++ b/keyboards/dm9records/tartan/config.h
@@ -0,0 +1,246 @@
+/*
+Copyright 2019 Takuya Urakawa (dm9records.com)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+/* VID & PID from vusb project, see tmk_core/protocol/vusb/USB-IDs-for-free.txt"*/
+#define VENDOR_ID 0x16c0
+#define PRODUCT_ID 0x27db
+#define DEVICE_VER 0x0001
+#define MANUFACTURER dm9records
+#define PRODUCT Tartan
+#define DESCRIPTION 60% keyboard with through hole components
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 13
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B4, B5, B3, B0, C0 }
+#define MATRIX_COL_PINS { D7, D6, D5, D4, B1, B2, C1, C2, C3, C5, D1, D0, C4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
--- a/keyboards/dm9records/tartan/info.json
+++ b/keyboards/dm9records/tartan/info.json
@@ -0,0 +1,34 @@
+{
+  "keyboard_name": "Tartan # Through Hole",
+  "keyboard_folder": "dm9records/tartan",
+  "url": "https://github.com/hsgw/tartan",
+  "maintainer": "hsgw(Takuya Urakawa)",
+  "width": 13,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_60_ansi": {
+      "key_count": 61,
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+    "LAYOUT_60_ansi_split_bs": {
+        "key_count": 62,
+        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":1}, {"label":"", "x":14, "y":0, "w":1}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+      "LAYOUT_60_ansi_split_bs_rshift": {
+        "key_count": 63,
+        "layout": [{"label":"ESC", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"BS", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+    "LAYOUT_60_iso": {
+        "key_count": 62,
+        "layout": [{"label":"¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+    "LAYOUT_60_iso_split_bs": {
+        "key_count": 63,
+        "layout": [{"label":"¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+    "LAYOUT_60_iso_split_bs_rshift": {
+        "key_count": 64,
+        "layout": [{"label":"¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    }
+  }
+}
--- a/keyboards/dm9records/tartan/keymaps/default/keymap.c
+++ b/keyboards/dm9records/tartan/keymaps/default/keymap.c
@@ -0,0 +1,34 @@
+/* Copyright 2019 Takuya Urakawa (dm9records.com)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_60_ansi(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_RALT, KC_RGUI, MO(1),   KC_RCTL
+  ),
+  [1] = LAYOUT_60_ansi(
+    KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+    _______, _______, KC_UP,   _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_INS, _______,
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN, KC_DOWN, _______,
+    _______, _______, _______,                   _______,                            _______, _______, _______, _______
+  )
+};
--- a/keyboards/dm9records/tartan/keymaps/default/readme.md
+++ b/keyboards/dm9records/tartan/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for Tartan
--- a/keyboards/dm9records/tartan/readme.md
+++ b/keyboards/dm9records/tartan/readme.md
@@ -0,0 +1,25 @@
+# Tartan # Through Hole
+
+![tartan](https://i.imgur.com/1qSrVcs.jpg)
+
+A 60% keyboard with only through hole components.   
+
+* Keyboard Maintainer: [hsgw](https://github.com/hsgw)
+* Hardware Supported: ATMEGA328p with vusb [PCB](https://github.com/hsgw/tartan)
+* Hardware Availability: https://5z6p.com/products/tartan/
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dm9records/tartan:default
+
+Flash firmware:
+
+    // In bootloader mode
+    make dm9records/tartan:default:flash
+
+## Bootloader
+use usbasploader in my repository.
+https://github.com/hsgw/USBaspLoader/tree/plaid
+
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/dm9records/tartan/rules.mk
+++ b/keyboards/dm9records/tartan/rules.mk
@@ -0,0 +1,36 @@
+# MCU name
+MCU = atmega328p
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = USBasp
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift
+LAYOUTS_HAS_RGB = no
--- a/keyboards/dm9records/tartan/tartan.c
+++ b/keyboards/dm9records/tartan/tartan.c
@@ -0,0 +1,16 @@
+/* Copyright 2019 Takuya Urakawa (dm9records.com)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "tartan.h"
--- a/keyboards/dm9records/tartan/tartan.h
+++ b/keyboards/dm9records/tartan/tartan.h
@@ -0,0 +1,111 @@
+/* Copyright 2019 Takuya Urakawa (dm9records.com)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_60_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k49, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k4b, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+    k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+    k40, k41, k42, k43, k44, k45, k46, k47 \
+) \
+{ \
+    { k00, k01,   k02, k03, k04, k05, k06, k07, k08,   k09, k0a,   k0b, k0c   }, \
+    { k10, k11,   k12, k13, k14, k15, k16, k17, k18,   k19, k1a,   k1b, k1c   }, \
+    { k20, k21,   k22, k23, k24, k25, k26, k27, k28,   k29, k2a,   k2b, k2c   }, \
+    { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38,   k39, k3a,   k3b, k3c   }, \
+    { k40, k41,   k42, k43, k44, k45, k46, k47, KC_NO, k49, KC_NO, k4b, KC_NO } \
+}
+
+#define LAYOUT_60_ansi_split_bs( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k49, k4a, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k4b, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+    k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+    k40, k41, k42, k43, k44, k45, k46, k47 \
+) \
+{ \
+    { k00, k01,   k02, k03, k04, k05, k06, k07, k08,   k09, k0a, k0b, k0c   }, \
+    { k10, k11,   k12, k13, k14, k15, k16, k17, k18,   k19, k1a, k1b, k1c   }, \
+    { k20, k21,   k22, k23, k24, k25, k26, k27, k28,   k29, k2a, k2b, k2c   }, \
+    { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38,   k39, k3a, k3b, k3c   }, \
+    { k40, k41,   k42, k43, k44, k45, k46, k47, KC_NO, k49, k4a, k4b, KC_NO } \
+}
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k49, k4a, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k4b, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+    k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k4c, \
+    k40, k41, k42, k43, k44, k45, k46, k47 \
+) \
+{ \
+    { k00, k01,   k02, k03, k04, k05, k06, k07, k08,   k09, k0a, k0b, k0c }, \
+    { k10, k11,   k12, k13, k14, k15, k16, k17, k18,   k19, k1a, k1b, k1c }, \
+    { k20, k21,   k22, k23, k24, k25, k26, k27, k28,   k29, k2a, k2b, k2c }, \
+    { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38,   k39, k3a, k3b, k3c }, \
+    { k40, k41,   k42, k43, k44, k45, k46, k47, KC_NO, k49, k4a, k4b, k4c } \
+}
+
+#define LAYOUT_60_iso( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k49, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k4b, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+    k40, k41, k42, k43, k44, k45, k46, k47 \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08,   k09, k0a,   k0b, k0c   }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18,   k19, k1a,   k1b, k1c   }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28,   k29, k2a,   k2b, k2c   }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38,   k39, k3a,   k3b, k3c   }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, KC_NO, k49, KC_NO, k4b, KC_NO } \
+}
+
+#define LAYOUT_60_iso_split_bs( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k49, k4a, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k4b, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+    k40, k41, k42, k43, k44, k45, k46, k47 \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08,   k09, k0a, k0b, k0c   }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18,   k19, k1a, k1b, k1c   }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28,   k29, k2a, k2b, k2c   }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38,   k39, k3a, k3b, k3c   }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, KC_NO, k49, k4a, k4b, KC_NO } \
+}
+
+#define LAYOUT_60_iso_split_bs_rshift( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k49, k4a, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k4b, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k4c, \
+    k40, k41, k42, k43, k44, k45, k46, k47 \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08,   k09, k0a, k0b, k0c }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18,   k19, k1a, k1b, k1c }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28,   k29, k2a, k2b, k2c }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38,   k39, k3a, k3b, k3c }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, KC_NO, k49, k4a, k4b, k4c } \
+}
+
+#define LAYOUT_all LAYOUT_60_iso_split_bs_rshift